Modify a Style’s Font Color to help find missed formatting
Quickly determine which paragraphs in a document have been formatted using one style, rather than another, by changing the colour of the formatted text.
To do this, click the Home tab on the Ribbon, hover over the style’s name you want to edit in the Styles gallery. Now, right click it and select Modify. In the Modify Style dialog, change the Font Color to something that will stand out on the page (such as purple) and click OK.
Now scroll through your document to see if the style has been applied everywhere you wanted it applied. Remember, if you don’t make any changes at this point, you can quickly undo the colour change by selecting Undo.
Otherwise, when you are done formatting the document, set the colour back to the original Font Color by repeating the above steps.
Learn how to create uneven lines that look hand drawn to use for cartography and other uses in Photoshop. Make use of Hue/Saturation adjustment to add vintage color, use brushes to create a pattern for the lines. Also, show how to render lines in black and white without any shades of grey and, lastly, how to distort them slightly. This video also shows how to add shadow around land mass and multiple lines of edging for a land mass.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you some line drawing techniques for creating maps in Photoshop. In this video I’m going to show you how you can create the effect that we have here around the edge of this chart. We’re going to draw the edge. We’re going to add this shading and also create these lines so that we can see how this could be created. The pattern in the middle is just a very simple pattern fill. We won’t be covering that, but we’ll be covering everything else in this video tutorial.
So to get started I’m going to start with a new image. And I’m going to choose File and then New. And I’m going to create a very tall image. So it’s going to be 2,000 pixels tall, RGB color. Background contents of white is just fine, so I’ll just click Ok to create that image.
And what I want to do first of all is to create these lines. And we’re going to do that using a paintbrush. So I’m going to click on the paintbrush and let’s select a brush to use. And what I want is something relatively small so I’m going to start with something like this 4 pixel brush. And then I’m going to choose Window and then Brush to open this brushes panel here. And what I want to do is to set up the brush so it’s going to paint the lines for me. So first of all I’m going to adjust the spacing so that there’s increased spacing between the brush tips. And I’m going to leave the size at about 4 pixels. Then I’m going to shape dynamics because I want the size of the brush to vary.
So I’m going to increase this quite a bit so we start seeing that there’s some variety in the brush here. Minimum diameter I don’t want to change at all. And that’s pretty much all I need to do with the brush right now. And then I’m going to test it. So I’m going to make sure that I have black set as my background or foreground color, which it is here. And then I’m going to click with my brush here and I’m going to Shift click at the bottom because that will create a straight line of brush strokes. And let’s just have a look in here a bit closer at this.
You can see that we now have this sort of dotted line which is different varieties of line. Now if that’s not quite what I want I can just zoom out and we can start again. So I’m just going to undo the brush and perhaps we’ll go back and make the brush just a little bit bigger than it was. So let’s go to brush tip shape, increase the size just a little bit, and perhaps bring down the size jitter or up the minimum diameter so that we haven’t got quite so much variety in our brushes. I’m going to click here and then Shift click to finish my brush stroke.
Now what I want is a sampling of this. So I’m going to use this tool here which is the single column marquee tool, one of the few times you will ever find a need for this particular tool. I’m going to zoom in here so that I can see exactly what I’m selecting and I’m just going to click to select a single line through this image. Now that’s not the world’s best. So let’s just try again. My brush stroke is not completely vertical so that’s causing me some problems here. Let’s start this again. I’m going to click here, and again let’s Shift click to create a straight line. And let’s see if that’s a bit straighter. That will be when we click just to one side of it. So that’s going all the way through the dot.
So I’m just going to choose Edit and then Define Pattern because this is going to be a pattern. And it will be just this dashed line as our pattern so I’ll click Ok. I can now close this image because I don’t need it any longer. And let’s see how our pattern will work.
I’m going to create a new document, this time 2,000 by 2,000 pixels in size. And this time I’m going to fill it. So I’m going to choose Edit and then Fill. And I’m going to fill it with a pattern. So I’m going to select Pattern. And the very last pattern in this container here will be the pattern we’ve just created so I’ll click Ok. And there are our lines. And that’s a starter for our map.
Now with our lines we can make these bigger. So I’ve got a background layer here but I can click to make it into a regular layer. And we can just enlarge this. So if we want larger lines all we need to do is to just drag up and down on this to just make the lines a whole lot wider than they are. And because they’re lines we can just size everything like this.
If you want to make sure that that there are no gray areas to the lines, as you can see they’ve got slightly fuzzy sides here, just use Image and then Adjustments and then Threshold. And that just makes the lines black and white. They’re pure black and white now. And if you want a bit of variety, Edit, Transform and then Warp. And you can just adjust the lines with a little bit more of a curve or something through them so that they look a little less like they’re straight lines and perhaps a little bit more hand-drawn feel about them, Ok. Now let’s add our map part.
So I’m just going to grab the Lasso tool and for this exercise just draw a very wiggly sort of coastline that we’re going to use for our map. And white is my foreground color so I’m going to Alt Backspace, Option Delete on the Mac, to fill this with white. Now I want an edge around here so I’m going to choose Edit and then Stroke. And I’m going to stroke the edge with black. I’m just going to get all my tools over on this screen. So I’m going to select Black. And I’m going to make this a 6 pixel to begin with. And it’s going to be on the inside of this shape so I’ll just click Ok. And there’s our 6 pixel stroke.
Now I’m going to bring in this size. So I’m going to choose Select, Modify, Contract and I’m going to contract this by 10 pixels because I think that will be enough and then add another stroke. So again, Edit, Stroke. And this time I’m going to just use a 3 pixel stroke, but again on the inside. And then we’ll repeat that again, Select, Modify, Contract by 10 pixels and then repeat the stroke, Edit, Stroke and just click Ok. And then when I press Ctrl D you’ll see that we have the edges around here. But I’m actually just going to undo that Deselect right now because I have another piece to go in here.
What I want to do is to fill this shape with the grass so I have that as a pattern. So I’m going to choose Edit and then Fill, and again still pattern but here is my grass pattern here that I created earlier. And I’m just going to fill it with the grass pattern. Now we’re going to see how to create the shading around the edge. So I’m going to deselect the selection. I’m going to make sure I’m selected on the land, which is where the shading is to go, and I’m going to choose the Add Layer Style button here. And we’re going to choose an outer glow.
Now outer glow sounds like it should add some lightness around the edge but we can use it to add darkness. All we’re going to do is to select a dark color. Well we’ll stick with black right now. Now we can’t use screen as our blend mode. We’ll have to use something that will darken. So we’re going to choose multiply. And we’re going to set this if we want it to be full strength at 100 percent opacity. And we can adjust the size which is really the feathering around here. And the spread is how big it is. It would sound better to me if spread were really the feathering and size was the actual size. But that’s what you’re going to use.
So I’ll just click Ok. And now if we want to add this sort of sepia tone to the image, I’m going to make sure I have the image selected, and we’re going to do that with the hue/saturation adjustment layer, Layer, New Adjustment Layer, Hue/Saturation, click Ok. We’re going to select Colorized because we want to colorize this. And then we’re going to go and pick up our sort of brown color, increase the saturation and adjust the lightness. And you’re just looking for that sort of effect that is going to say vintage map to you. So I’m probably just going to select that for now.
And then I would finish off by cropping my image. We probably don’t need quite as much sea visible. In my image I have a one to one crop set here. That’s why it’s behaving a bit strangely. And there is our final result.
We’ve created lines using a brush in Photoshop. They’re all different size lines and we’ve created this sort of effect of an old-fashioned map. And actually if I just drag this adjustment layer up over the top of the fill we’ll really get that look of a vintage map.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my Photoshop tutorials on this YouTube channel. Subscribe to the channel. If you enjoyed it please comment and like this video. You’ll find more videos, tips, tricks and tutorials at my website at projectwoman.com.
Learn three must know blend modes for Photoshop and in particular for editing photos in Photoshop. Covers how to use Screen, Multiply and Overlay blend modes.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’ll introduce you to the three must know blend modes in Photoshop. I’ll explain how they work and how you might put them to use.
There are three blend modes that it’s really handy to know how to use in Photoshop, and we’re going to look at those three blend modes in this video tutorial.
In this particular image I have a picture of a building in Darwin and over the top of it I have a second layer. And on the right hand side is the exact duplicate of the layer below. And on the left hand side is just the color pink because we’re going to have a look and see how these blend modes work not only with images where you’ve got two layers that are identical but also what happens when you have for example a layer that is different. And the three blend modes that are really handy to use are got to by clicking this blend mode dropdown list in the layers panel in Photoshop.
If you can’t see your layers panel choose Window and then Layers and that will show you your layers panel. When you’re using blend modes you’ll always use the blend mode on the topmost layer or the layer that you want to affect. And it will affect how this particular layer blends in with the layer or layers below.
The first blend mode we’re going to look at it is this one here. It’s Screen. Now you’ll see that the blend modes here are grouped together. The blend modes in this particular group are the lightening blend modes. They are lighten, screen color, dodge, linear dodge and lighter color. And we’re going to look at screen in this particular group. And screen always lightens an image. So you can see here that the image is lighter than it was in the original. Here it’s colored this sort of pink tone. And here we’ve just got the original image over again, but it’s a lighter version. This is a blend mode that you can use to salvage an underexposed image. If you’ve got an image that doesn’t have enough light in it, you could use the image on each of the layers and then blend the top one into the bottom using the screen blend mode. And that will lighten the image and bring detail out of it.
The next blend mode we’re going to look at is similar but works in the opposite way. This is a darkening blend mode. And it’s accessible from this darken group of blend modes: darken, multiply color burn, linear burn and darker color. And in this case the one we’re going to use is multiply. And multiply darkens the image. You can see that we’ve got a darker version of the image with this sort of pink overlay. But here where we had the image on the two layers, the exact same image on each of the two layers, you can see that we’ve got a darkening of the image. This would be useful if we had an overexposed image. If we put the overexposed image on two layers and then blend them together with the multiply blend mode, we’ll bring back some of the detail in the overexposed image.
The other of the blend modes that you’ll typically use in Photoshop is overlay. It’s in this group of blend modes, and it’s one of the contrasty blend modes. What this does is it lightens everything that is lighter than a mid-gray and it darkens everything that is darker than mid gray. So it’s a nice contrasty blend mode. Let’s have a look here at what it’s doing to the image on the right. You can see that this is a flatter sort of image. And when I turn on this layer we’re getting a lot more contrasty image. And that’s what’s happening on the left too is we’re getting a contrasty, a colored version, of the original image. Anytime you want to boost the contrast in an image you can use the overlay blend mode.
So the three blend modes that I suggest that you look at using with your photos in particular are multiply to darken, screen to lighten, and overlay to add some contrast and punch. Now if you find that a certain blend mode is too much let’s just get rid of this particular layer and let’s duplicate the image itself. And let’s go and use the overlay blend mode. And if this is too much of a contrast enhancement to the image all you need do is to back off the opacity of this layer. This will give you some of the layer below and some of this additionally contrasty layer so that your image gets more contrast but perhaps not as much as it would have if you’d had this layer at 100 percent opacity.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel. Comment on the video and like it if you like it. And look out for more tips, tricks and tutorials on Photoshop, Lightroom, Illustrator and a whole lot more at my website projectwoman.com.
Learn how to combine two images to make a collage. Includes use of Blend modes in Photoshop, color range color selection, clipping mask, layer mask, hue saturation adjustment layer, drop shadow layer style.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can create some simple collage effects using blend modes in Photoshop. This is the effect that we’re going to create in this video tutorial. I’m going to show you how you can put the pieces of this together in just a few minutes using a couple of images and some blend modes.
We’re going to start off with this image and another one that I shot at the neon boneyard in Las Vegas, and that’s giving us the texture. And we’re going to combine these two images with a blend mode. And then we’re going to extract the color from this original image, this sort of orange color. And we’re going to recolor it using a Hue/Saturation adjustment layer. But if we wanted to leave it at this point we could leave it just with that additional color. And we’ll also going to add a drop shadow with a different color behind it.
So let’s see how we would create this effect. And I’m going to start with my two images, and I’m going to put one image into the other. So I’m going to grab this neon boneyard image and I’m just going to drag and drop its background layer in on top of this original image. I’m just going to size it so that it’s right over the top. And the first thing I would do with a collage like this is look and see what sort of opportunities I had with blend modes.
So I’ll generally select the first blend mode in the list, Dissolve, which generally gives me nothing at all. And now I can just arrow down and see what happens when I click on each of these blend modes. And all I’m looking for is something interesting. And you’ll generally get a better effect with this if you use images that are a little bit more textural and a little less like something where you don’t really particularly want to bring out of the image exactly what was in it. But you want to discover how these two images can interact with each other and what you can do with them as they interact. So that’s all the way down through the blend modes. And so I’m going to go back up and I’m going to settle on something that I want to use. And generally the most interesting bits are going to be in the overlay or the contrasty area. So in this area and sometimes even with lighten and darken.
So let’s just go up through these and find something that we like. And I’m thinking actually I might like something like this perhaps with the Opacity dragged down a little bit. Now what I want to do is to bring out the orange color in the original flower so that I can lighten them a little bit in this layer here. And what I’m going to do is create a duplicate of the background layer. And I’m going to drag it above the image. So right now all we’re seeing is this original background. And what I want to is to select the leaves in it.
Now the leaves are really bright colored here. So I’m going to choose Select. And in this case I’m going to use Color Range because it’s going to be the easiest way to select these leaves. Now either I can select on the sampled color and add to it this way by just clicking on these leaves or I could use just the reds and just grab the reds. But I think Sampled Colors is actually going to give me a slightly better effect here.
So let’s just go back to this and let’s choose Sampled Colors here and just click Ok. Now that has isolated the leaves here and what I want to do is to keep these leaves but drop the rest of the image out. And I’ll do that with a mask. And because my leaves are selected, all I need to do is to click on the Add Layer Mask icon. And what happens is that the leaves are then masked and left behind and the rest of the image is just dropped away. So this is the before and this is the after. And you can see we have brought in the color from these leaves.
Now if we wanted to we could even lighten this color. We’ve got some of the orange color in. But we may want to brighten it up even more. So I’ll make sure that my image layer is selected and choose Image, Adjustments. And then I could use levels or curves. I’m going to use levels, and I’ll just lighten this is a little bit and click Ok. Now in the earlier image that you saw we had actually colored these blue and it’s very easy to color them blue.
To do that we’ll choose Layer, New Adjustment Layer and we’ll choose a hue/saturation adjustment layer and just click Ok. Now I want this adjustment layer to only affect the red leaves so I’m going to clip this. So with this adjustment layer selected I’m going to choose Layer, Create Clipping Mask. And so anything that I do to this adjustment layer here is only going to affect the layer below, just these red flowers. So now let’s double click on the Hue/Saturation adjustment layer and now we can go and make some changes to it. And I’m looking for a blue color which will either be at this end or this end of the hue slider. So I can get to either this sort of greeny blue if I wanted or I can get to a sort of purplely blue. I’m thinking the greeny blue will be pretty good here. And now I can adjust its saturation and its lightness from here. So when I have what I like I’m just going to close that dialogue. So that has recolored those leaves to a bluey color.
And finally let’s add a drop shadow behind the leaves. So I’m going to select the leaf layer, and I’m going to choose a drop shadow effect. Now drop shadows might start out being dark but they don’t have to end up being dark. So what I’m going to do is go and find a really cool color for this drop shadow. And I’m thinking a really, really bright pink will do me. So let’s choose that. And I want to up the opacity of this. I could set it to normal so it’s going to be a very, very pink shadow. And then I’m going to adjust the settings for this. Spread is going to be the size of the shadow and softness or size is going to give me some softness. But there’s a very small sweet spot here on this that I can very, very easily exceed. So I’m just going to add my shadow in. And I think I’m going to multiply blend mode my shadow, not apply it with the normal blend mode. Although I could use normal for example with a much lower opacity if I wanted to give it this sort of pinky color. I might leave it at that.
So there’s a way of creating some interesting collage effects. And all we’ve done is grabbed a couple of images and put them on top of each other and blended them with something that counts as being an interesting blend mode. And then I isolated the orange flowers in the image and brightened them up. I also added a drop shadow in a very contrasty color. And I added to a hue/saturation adjustment layer that only effects these orange flowers to use the brightness of them but to color them a different color. And you can do all sorts of things by just combining images. And that gives you lots of practice at making color selections, using clipping masks, using masks, using blend modes and just having a little bit of playtime and a little bit of fun creating interesting effects in Photoshop.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel and please like and comment on the tutorials if you would. Also visit my website at projectwoman.com where you’ll find more tips, tricks and tutorials on Illustrator, Lightroom, Photoshop and a whole lot more.
Learn how to recolor line art in Photoshop and how to change the colors very easily.
This video shows the use of the Lock Transparent Pixels option in the Layers Palette in Photoshop and also a Hue/Saturation adjustment layer.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can recolor your art in Photoshop. In this video tutorial we’re going to have a look and see how we could recolor this car and how we can do it in a way that would allow us to perhaps change the colors later on.
I’ve got the car on one layer here and the background which is white on another layer. So I’m going to add a layer between these two layers where I can start painting my colors. I’m going to select one of these color schemes that in an earlier video I created from Kuler and I’m going to just grab my toolbar here so that I can grab a paintbrush and a relatively hard paintbrush, not totally hard but relatively hard. I think I’ll just back it off a little bit here to about 84 percent. And on this layer I’m going to start laying down paint. I’ve got my opacity right down from another job that I was doing so let’s just kick that up.
Now I’m just going to paint over the areas where I want the paint to be. And how detailed you are with this and how accurate you are with it depends on just what sort of effect you want. Now I don’t want it to be quite so accurate so while I am going to erase a little bit of this I’m not going to erase all of it because I do want some over-painting. Now I could leave this layer underneath but you’ll see that there is a little bit of white there that’s showing through. I can get rid of this by going to this layer here and setting its blend mode to darken and that will darken the areas but will let the white pixels blend in with the layer below. I think that gives me a better result.
So let’s go now and let’s get another color in this color palette and let’s just go and paint here. And I’m just going to pick the paintbrush up rather than the eraser and let’s Just paint in these areas. Again depending on what sort of effect I want I may be more or less accurate and I can always come back with the eraser and just tidy up if I want to. Most of these areas of the image are also trapped so if I wanted to I could just make a selection from the original image and pour paint into them. But I don’t really want that effect for this image. I just want it to be a little bit more organic than that. And I’m going to add the orange to various portions of the image but I’m going to do it all on this one layer. So that means that later on I can come back and replace the orange with another color and every element that was orange will be replaced accordingly. So let’s just go here. I think I’ve got a slight problem with my green. So I’m just going to continue until I have my car painted to my satisfaction and then we’ll come back and see how we would recolor it.
Now I’ve finished painting the car and I’m ready to go ahead now and have a look at my options for recoloring it. One of the ways I can change the color of this image is to click on the topmost layer and choose Layer, New Adjustment Layer, Hue/Saturation. And this allows me to recolor the entire image just using a single adjustment layer. So I’m just going to drag here and then if I drag around on this color selector here you can see that all of the colors bar that sort of gray color are now changing. And they’re changing in the same relationship to each other. So that’s one of the options I have for recoloring this vehicle is to just adjust the hue/saturation of the entire image using a hue/saturation adjustment
layer and just stopping when I get to the color scheme that I want to use for example.
Now another alternative is if I want to just selectively recolor areas because I put each of these colors on a different layer I can then just change those layers. So for example let’s go and pick up another Kuler color scheme. I’m in beach ball but that doesn’t really matter too much. Let’s go and get this beach combo color scheme from Kuler. And if you haven’t yet watched my Kuler video and if you want to know how to do this then I suggest that you go and have a look at it.
Now my mouse and my video tool aren’t running very well together right now so I’m having a bit of trouble selecting this. Ok, it’s now in the Swatches panel. So I’m going to go ahead and select this blue color as my foreground color. And I want to replace this color green with the blue. Now what I’m going to do is because there’s a lot of detail on this layer and I want to replace the whole lot, I’m just going to lock the pixels on that layer. And what happens when I lock the pixels is if now I press Alt and Backspace, Option Delete on the Mac, what I’m doing is flooding just the filled pixels on this layer with that Color and so now that layer has been recolored. I’m going to select this layer and lock the pixels on it and pick up a color to use for it and then I’ll Alt Backspace, Option Delete on the Mac, to change its color.
And finally I’m going to lock the pixels on this layer and let’s go and get a color to use for that. We’ll choose this darker blue, Alt Backspace, Option Delete. Of course these layers are now locked so if I want to be able to edit them for example erasing any excess paint or making any changes to them, I’ll need to unlock them. But this Lock Transparent Pixels tool allows you to quickly isolate the contents of a layer, select a color to use for it and just Alt Backspace, Option Delete on the Mac, to immediately select and refill all the pixels on that layer.
I’m Helen Bradley. Thank you for joining me for this video tutorial. If you liked this tutorial please give it a thumbs up and feel free to comment on it. Please consider subscribing to my YouTube channel and visit me at projectwoman.com for more tips, tricks and tutorials on Photoshop, Photoshop Elements, Lightroom, Illustrator, GIMP and a whole lot more.
Learn how to use Kuler color schemes in Photoshop via the Kuler Extension.
This video includes details of how to add color schemes to swatches and how to edit, customize, and create Kuler color schemes inside Photoshop CS4, CS5 & CS6.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can use Kuler colors in Photoshop. In this video tutorial we’re going to have a look at Kuler which is a way that you can find custom color schemes from inside Photoshop.
Now Kuler is also available online but we’re going to work with the Photoshop extension. And that’s been there since CS4. To see it choose Window and then Extensions and then Kuler. And when Kuler launches you get to see some of the color schemes.
Now I last looked for vintage car and that’s in actual fact what we’re going to look for now. So I’ve typed in vintage car and clicked the Search button and here are color schemes that are related to vintage cars. And if I can’t see anything I like there I can click the View Next Set of Themes option and we can go forward to see other themes. Now these themes have been designed by other people and they’re available online. And people put them up online when they create them and then they are accessible for us to use if we want to use them.
So I’m looking for a theme to use for my car. And let’s say that I find one, so let’s just go and find one that we sort of like. I’m thinking this one here. And if I like it I can just click on this arrow icon here and I can add it to my swatches panel. And when I do that it becomes the last five colors in my swatches panel and I can click on any of these colors to add it as my new foreground color. And that allows me to paint on it for example to recolor my car.
Now if I sort of like it but think I like to edit a color for example maybe the red in this, then I can click here and choose Edit this theme. And this opens the Kuler panel but this time in the edit mode. And this is where I can change some of these colors.
For example I can take the red and walk it around to maybe make it an orange. And if I like that then I can use this particular color scheme. If I want to save this theme to my swatches panel I can do so by clicking here, Add this theme to swatches panel, again this time all five colors go into the swatches panel. I could upload it to Kuler if I wanted to and I can name and save the theme.
You can also create your own custom themes here so for example if you wanted to create an analogous color scheme you could do that. So you could just click there and then you can drag around on these sliders to make the color scheme that you want to use. If you want to use a complementary one you can do that and just drag in and out on these colors to create your own complementary color scheme. And if you like it then you can add it to your swatches panel. You can upload it to Kuler.
Kuler is a really handy tool for finding color schemes if you’re not sure what you want to use and so you can quickly and easily find color schemes and add them to your swatches panel. So it can help you get inspiration when you want to use a limited color palette on your images and you’re just not really inspired to find it yourself.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more tutorials on this YouTube channel. Also visit my website at projectwoman.com for more tips, tricks and tutorials on Photoshop, Photoshop Elements, Lightroom, Illustrator and a whole lot more.
Playing with color using a Gradient Map Adjustment Layer
I’ve been fiddling around with halftones and grayscale posterized images lately – partly for a magazine project and partly for some things I am designing. Sometimes, however, I just play for the sake of it and today’s post is all about that playtime.
Posterized images have a flattened color look – the entire image is flattened to a few bands of color and I was interested to see what color variations I could get with a Gradient Map over an image. Gradient maps work by mapping a color onto a tone in the image and, with a regular image, the colors sort of blend across the image. However, posterized images are different – they have flat areas of color so the Gradient Map will not be seamless and instead it is going to recolor the posterized image in great big solid blocks of color.
Here is the image I started with:
To see this at work, first convert the image to black and white using Image > Adjustments > Black & White and create a nice contrasty black and white.
Then add the posterized effect by choosing Image > Adjustments > Posterize and set the Levels to 4 or 5 – this makes the image into one that has 4-5 tones only in it.
Now to recolor the image with the Gradient Map choose Layer > New Adjustment Layer > Gradient Map and click Ok.
From the dialog select a color scheme to use. The new photo filters which are included in Photoshop CS6 are a great choice but absolutely anything will give a great result. The colors are mapped on to the image according to the light and dark tones in the image. If you click Reverse you’ll get a negative effect. Find the color to use and close the dialog.
Because you’re using an Adjustment Layer you can change the colors anytime by just double clicking the adjustment layer and choose a different color combination.
I finished off by finding an image to use with this one. I flattened the camel to a single layer by pressing Control + Alt + Shift + E (Cmnd + Option + Shift +E on the Mac) and then dragged the flattened layer into a second image.
Then I used a mask on the camel layer to select and remove the background. I positioned the camel in an interesting place and cropped the image to square. I added a small vignette around the image too.
One way you can strengthen your images is to use a limited color palette. This involves actually choosing areas/things to include in your images and what to leave out.
When you aren’t seletive about color you run the risk of including a lot of color which can be visually confusing especially when it doesn’t add to the photo.
So, a shot of colored flags or colored shapes is great because the shot is all about color but lots of color in an image about something else can just add up to clutter and is distracting. Here the color works because the scene is supposed to be busy:
When I am shooting I will often try to limit the color palette by selectively leaving out areas of a scene that have colors that aren’t in the palette I am using. I may also look out for specific color such as in doors and buildings that are interesting simply because of the colors used. I might also look for a scene like this where the colors suit the subject matter and reinforce the desolation:
Here the bright colors and the contrast in the red and green make for a great image – it wouldn’t be the same if the building were white or pale green for example:
Like everything you shoot, it helps to be aware of color and how you can use it to make better photos.
Want to quickly switch the colors you’re working with back to the default black and white? All you have to do is hit the D key on the keyboard and the color palette will be reset to the default black foreground and a white background.
(photo by: Jenny Kennedy-Olsen)
(photo by: Leroy Skalstad)