Learn how to darken the edges of an image using a Vignette in Lightroom
Vignettes are a darkening or lightening of the edges of an image – they can make an image look very attractive.
To add a vignette, open the Effects panel, set the Style to either Highlight Priority or Color Priority – Paint Overlay is the least attractive option. Drag to the left on the Amount slider to add a dark vignette and to the right to add a light one.
The Midpoint slider adjusts how the effect is applied to the edges of the image. Increase it to remove the vignette from the edges leaving it mainly in the corners.
Roundness controls the roundness of the vignette, drag to the left to make it more square, to the right to make it more circular. Feather controls the softness of the edges so use 0 for a hard-edge and 100 for a very soft edge.
Highlights applies when you use a negative Amount to create a darkened vignette. Zero gives no change and larger values preserve highlight contrast when you select Highlight Priority or Color Priority.
How to use the Color sliders to change color and remove color casts
When an image has a colorcast or a color that you’re wanting to play down in it, select the Color option in the HSL/Color/B&W panel. Here you can select the color to minimize the impact of and reduce its impact by dragging on the Saturation slider to reduce its saturation. Drag to the right on the Luminance slider to lighten the color.
This tool also allows you to take one color and alter its hue. So, for example you can target yellow and drag it towards green or towards orange by dragging on the Yellow Hue slider. In this way, any color in the image can be adjusted to one of its adjacent colors.
When you’re printing, you’ll want a good range of tones across your image from the blackest of blacks to the lightest of lights. Use the Blacks adjustment slider to ensure that you will have some black tones.
To see the blacks in the image, hold the Alt key (Option on the Mac) as you drag on the Blacks slider and stop when you see the first few colored pixels appear on the screen
Learn to make realistic rivets in Photoshop. This tutorial makes use of the new photo filters in Photoshop CS6, but doesn’t require their use, so, you can make the rivets in any version of Photoshop. You will see how to add dimension with Bevel and Emboss and Contours, as well as with gradients and light. The tutorial is easy to follow and the process of making a rivet quite simple.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can create rivets quickly and easily in Photoshop. Before we get started making the rivets let’s have a look and see what it is that we’re creating. And this is the type of rivet that we’re going to create. This one’s a copper rivet, but we can make them in any colors that we like.
To start off I’m going to choose File and then New and I’m going to create a new image. This one’s going to be 500 by 500 pixels because I like my rivets to be able to be shrunk down so that they can look realistic in place. So I’m just going to click Ok. And the first thing I’m going to do is to fill this layer here with a gradient.
Now in Photoshop CS6 there are some new photo gradients that you can use. And I really like these for rivets, but in earlier versions of Photoshop you can go and do the same thing and you can create your own look in gradients. So you don’t have to have these gradients available, but you will find that they are kind of handy for creating rivets as well as of course coloring photos. So I’m just going to click Ok and I’m going to apply this as a linear gradient. So I’m going to make sure I have Linear Gradient selected here and I’m going to drag it across the image here. I’m holding Shift to constrain it to a straight line. Now I’m not totally convinced about this particular gradient so let’s go and get something.
I know this copper one is going to work. So I just want something that is a little less harsh. This one’s got a distinct dark area and I want something that transforms from light to dark a little bit more smoothly. So this is a pretty good gradient. Now if this is a bit dark you can add a new layer to your image. So I’m going to add a new layer and I’m going to fill it with the foreground color by pressing Alt and Backspace because my foreground color is white. That’s Option Delete on the Mac. I’m going to set this to Screen Blend mode and just adjust the opacity down so that I can use most of the color underneath. But I could make it lighter if I wanted to. And I’ll just merge those layers with Ctrl and E to merge the layers. But if your gradient isn’t too dark then you don’t need to do that step.
I’m then going to choose the Elliptical Marquee tool and I’m going to drag a circle onto my gradient. And if I hold the Shift key with it that will be a pure circle. And if I use the Spacebar I can move the circle right into the center of the image. So I’ve still got the Shift key selected, I’m going to let go of the left mouse button and then let go the Shift key so I’ve got a circle here.
Now I’m going to invert that with Select Inverse so I have selected everything but the circle and I’ll press Delete. So this is the first part here of my rivet and it’s actually this outside part here. I’m going to duplicate this layer by dragging and dropping it on the New Layer icon. Now I got a bit enthusiastic there and ended up with more layers than I needed. So I now have two identical layers. I’m going to deselect the current selection by pressing Ctrl D or I could choose Select, Deselect. Now this is going to be in my inner shape so I’m going to Ctrl click on it, choose the Move tool, and then I want to size it in smaller. Now the way I do that is to hold both the Shift and the Alt keys as I do this. The Shift key constrains my movement to a full circle so I’m always going to have a circle here and the Alt key sizes it from the middle so that it’s not being repositioned. This second circle is going to be right in the middle of the first circle. So when I get it in place, let go of the left mouse button and then and only then let go of the Alt and the Shift keys, I’m going to click the checkmark here.
Now I want to transform this. And I want to transform it through 180 degrees so I’ll press Ctrl and T to get my transform details up here and I’ll type 180. And that’s flipped it around. In fact I think it could be rotated a little bit more attractively, probably to about here. Now at this point you’re going to get a relatively flat looking rivet. And I actually prefer to at this stage actually go and reapply the gradient. So I’m going to select my gradient again, with this layer I’m going to lock the pixels on it so that I can drag my gradient in and it’s only going to affect the area marked out by the circle. I’m also going to select a radial gradient because what I want to do is for this part of the gradient here to be light and the outer edge to be dark, and I’m just going to find a good position for it. And I think this is a pretty good gradient. So you can just continue to drag until you get it into the right place. Let’s just unlock that now. We’re ready now to add a Bevel and Emboss.
So I’m going to click the bottom layer here, choose the Add Layer Style icon and I’ll choose Bevel and Emboss. Now in contour I want one of these contours, this one, this one or this one. They’re all going to work pretty well. And I’m going to just adjust the range so that I push it to the very edge of the shape. Let’s go back into Bevel and Emboss and now I’m going to reduce the depth quite a bit, reduce the size, just get it to what I want it to look like. Now we have a problem with the light now. At the moment from Photoshop’s point of view and for this Bevel and Emboss effect, Photoshop has the light coming from this direction. But you can see that the light is actually coming from this direction on the rivet itself. So we need to adjust the light here to match our rivet.
So I’m going to bring in a global light here that is hitting from this direction. And then I’m going to adjust my Screen and my Multiply so that I get the effect that I want. I don’t want a really, really harsh set of settings here. I just want the very smallest amount. And then I’m going to add a Drop Shadow so I’ll click Drop Shadow, select the Drop Shadow itself.
Now I think that these are badly named in Photoshop. Size in actual fact it’s more like a feather. So size will give you a softer or a harsher shadow and the actual physical size of the shadow is really controlled by the spread and the distance. So I’m going to bring my distance and my spread in quite small and adjust the size of it which gives me that sort of feathering effect and click Ok. And let’s just zoom out here and there we have our rivet. And this one’s a copper rivet but you’ll find that there’s plenty of things to choose from in this set of photo gradients. And you can create your own gradients to create your own look for your rivets.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more video tutorials on this YouTube channel, subscribe to the channel, click Like if you liked this video and visit my website at projectwoman.com for more tips, tricks and tutorials on Illustrator, Photoshop, Lightroom and a whole lot more.
Find Lost Details Hidden in Shadows and Darker Parts of an Image
When you have an image that has details lost in the shadows or darker areas of the image, the Fill Light slider in Lightroom 3 or the Shadows slider in Lightroom 4 can be used to recover this detail.
Don’t use either of these as a tool for lightening an image or to lighten shadows if there is nothing interesting in the shadows. Use them instead when you want to get some interesting detail out of the shadows.
The result of using the Fill Light and sometimes using the Shadow tool is that some contrast in the image will be lost – so you nay need to increase Contrast as a result of using the Fill Light slider in Lightroom 3 or apply a tone curve adjustment in Lightroom 4.
Create a cancelled postal stamp watermark to use in Photoshop and Lightroom. See how to use the path tools to create the watermark and then save it as a png image with a transparent background so it can be used over your images.
This is the video explanation of the blog post on the same topic which you can find here:
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’ll show you how to create a postage style copyright stamp that you can use on your images. In this tutorial I’m going to show you how you can create a copyright symbol like this which is a couple of concentric circles and some wavy lines and text. And it’s got an overall texture to it.
This is a tutorial that I created for digital-photography-school.com when one of my readers there was having a bit of difficulty following along. So that’s why I’ve created this as a video tutorial. And because of this I’m going to be doing it step-by-step as I did it for that particular tutorial on the Digital Photography School site. And you’ll see in the comments here just below the tutorial I’ve given you a link to that site if you want to follow along.
So the first thing that I did in that tutorial was to create a brand new image. So I’m going to do that now. I’m going to choose File and then New. And I’m going to do a letter size image, landscape. So it’s 11 inches wide by 8.5 inches tall, and it’s 300 pixels resolution, RGB color and the background contents are white. So I’m just going to click Ok. And here’s our starting image.
Now we’re going to add a new layer so I’m going to have my layers palette visible. So if you don’t have it visible choose Window and then Layers so that you can see it. And we’re going to add a new layer and we do that by clicking this little icon here. It’s the Add New Layer icon. It looks like I clicked it twice. So I only want one new layer here. And we’re going to draw our circles using the Ellipsis tool. And it’s here in the toolbar so let’s just have a look and see what we’re looking for.
We’re looking for this tool here. It’s the Ellipsis tool. And when you choose it you want to choose Paths from the tools option palette. Now the options are a little bit different in earlier versions of Photoshop. There are three icons here and you want to make sure that you click the icon that says Path when you mouse over it. They’re the exact same options. They just deliver differently. And this is Photoshop CS6’s version so I have Path selected.
I’m going to drag to draw an ellipsis, but you can see that this is going to be a sort of oval. I want it to be a circle so I’m going to hold Shift as I draw it. And if it’s not in the correct position before I let everything go I’m going to hold the Spacebar and move it into position, let go the Spacebar and just make sure that I have the outermost of my circles created. And when it’s dead right, I’ve still got the Shift key held, I’m going to let go of my Left Mouse button.
So now I have a circle the shape of this outer circle that we’re going to use. Now this is now going to be colored in and we want to stroke this circle. And we do this by going here to the Paths palette. Now the Paths palette you get to by choosing Window and then Paths. And the topmost path is going to be called your work path and that’s the one that you’re working with. This is this circle here. We want to stroke the circle with a brush so we’re going to go and select a brush to use.
So I’m going to click on my Brush tool and then I’m going to select the kind of brush that I want to use. And I’m going to use a hard sort of brush here. So I’m going to select that brush. It’s a hard brush. And let’s just check and see from the original tutorial just how big it needs to be. And apparently it needs to be 40 pixels. So let’s just take it up to around 40 pixels. That’s 39, but that’ll be fine.
I’m going to set black as my foreground color. So I’ve set my brush and my foreground color and what I want to do now is with this path selected I’m going to choose the option that says Stroke Path with Brush. So that’s this icon here. So I’ll click it to stroke the path with a brush. Now I’ve got a funny sort of stroke here and the reason is that my stroke is set to something I don’t want it to be set to. So let’s just wind that back with Edit, Undo.
Then I’m going to right click on this Path option here and choose Stroke Path. And I want to disable this option here, Simulate Pressure. I just want to stroke it with the brush so I’m going to click Ok. Now it’s working the way I want it to. So now I have my path stroked, well at least the outside stroked. Now I need to use the outside to make the inside because it’s going to be really easy to make a concentric circle. To do that I’m going to click on this tool here. It’s the Path Selection tool.
This is the one I want and it shares a position with the Direct Selection tool. But it’s the black one, the Path Selection tool that I want, and I’m going to click on my path so it is selected. Now I want to transform this. And the transformation handles have not appeared so I’m going to press Ctrl T to make them appear. I want to drag in on this handle. But I want to make sure that I don’t lose the circle and I want to make sure that I don’t lose the fact that it needs to be concentric. So I’m going to just hold down both Shift and Alt as I drag in on this handle. So let’s Shift Alt and drag inwards. And you can see that what I’m doing is making a concentric circle. It has the exact same middle as the original circle. I’m going to let go of my Left Mouse button and then let go of the shift and the Alt keys. Now my work path here is a much smaller path so I’m just going to click the checkmark here.
Now I’m going to do exactly the same thing. I’m going to select my brush and I’m going to stroke it, make sure black is my foreground color, and I’m going to stroke this path with the brush. And I get the exact same effect. Now what I need to do is to make a path for my type. And it needs to be a little bit bigger than this inside circle. So again, I’m going to click this Path Selection tool. I’m going to press Ctrl and T to show my handles, I’m going to hold down Alt and Shift, that’s Option and Shift on the Mac, and this time drag out just a little bit so that I get a path for my type, let go of the Left Mouse button, let go the rest of the keys and click the checkmark. Now I’m going to add my text. And to do that I’m going to select my Text tool and then select my type. And I want to use Myriad Pro.
So I’m going to go down here until I find Myriad Pro. And I think the type that I suggested in the article that we used was about 24 points so I’m going to click that. I have black as my type color. So everything looks pretty good. I’m going to hold my mouse over the line, over this path that is still selected, and when I do you’ll notice that the I-beam pointer changes from this I-beam to an I-beam with a short of squiggly line. That means I’m typing on the path. So I’m going to click to do that.
Now the first thing I need to do is to add my copyright symbol. So I’m going to hold down the Alt or Option key and type out 0169 on the keyboard because that gives me copyright, and now 2013, and I’m going to type my copyright details. And I think I’ll do this all in capitals. And I’m using Helen Bradley, projectwomam.com. And I think actually I just want to put a www in there so I’ll just arrow back and make that change.
Now so far my type hasn’t quite stretched all the way around my words. So the next thing we need to do is to stretch it just a little bit more. And I’m going to do that using the Character Spacing tool. So first of all, I’m going to make sure that all my text is selected and then I’m going to choose this dialogue here which will get me to the Character Spacing dialogue. Now this is two dialogues.
There’s a paragraph and a character, and we want the character. And what we want is this tool here, this VA tool. And it’s a scrubby slider so all I need to do is to adjust it a little bit. And can you see that the text is getting bigger every time I drag on it? And I think I’m going to wind that back just a little bit because I could probably add a trailing dash to this. And that’s now all the way around that shape. And let’s just up that to bold because I don’t think it’s really quite dark enough for me. And if I’m using bold I’ll going to have to wind back up on my character spacing a little bit. And so now I’ve created my text on a circle.
Now the only thing that I’m a little bit concerned about is I think that this circle could be a little bit smaller. So I’m going to reselect my text layer here, and again with Alt and Shift selected, I’m going to drag inwards just a little bit to resize that circle path that the text is on because I just think it was a little bit on the big side. So I’m a little bit happier with my text now.
So we’re ready now to go ahead and to create the wavy lines. And we’re going to do that by clicking on the Custom Shape tool here that shares that toolbar position with the Ellipse tool that we used earlier. But this time we want Custom Shape. And from the Shape dropdown list here what we’re looking for is this wiggly line wave shape. Now this is shipped with Photoshop so you will have the wave shape. If you don’t have it in your collection you can click this little fly out arrow and choose All to add all the shapes or append all the shapes to your shapes collection. But this is the one we’re using.
I’m going to drag the shape onto my image and then use the Path Selection tool to just move it into position. Now at the moment it’s a series of closed paths and I want to open these paths. And I’m going to do that by clicking here on the Add Anchor Point tool. Unfortunately you can’t just delete points in Photoshop to open up these curves.
We first of all have to add a point in here that we can then go and delete to open it up. It doesn’t work otherwise. It’s a bit of a nuisance. But this is how we’re going to do it. So I’m going to click once with this Add Anchor Point tool on the ends up all of the shapes. And now I’m going back to the Direct selection tool. And I’m going to make sure that I’m selected on this point that I just added, so it’s black and everything else around it is not, and I’m going to press the Delete key. And that will just break that path in two. And I’m going to repeat that for each of these points.
So select it and press Delete, select it, press Delete, select it, and press Delete. Now if Photoshop is running out of memory if you’ve been using it quite a bit, you might find as I just did earlier that that was not working. Every time I pressed Delete the entire path was going. So I just closed down Photoshop and reopened it and went back to where I was working and it’s working perfectly. So now I have my lines. And you’re probably beginning to see a pattern here because this is just another path. And we can stroke it because we have our tool that we can stroke it with.
So I’m just going to go back and make sure my brush is selected. The same brush is selected, black paint, click on the work path so that I have it selected and now I’m going to stroke it. And that is giving us our lines. And so if you wanted to leave it at this point you could because everything is in place. But I’m going to go ahead and add a Grunge effect to it.
Now we’re ready to create our Grunge effect. And to create that, first of all what we need to do is to flatten the image. But in flattening it I need to remove the white layer from the flattened version. That is because later on when I will put this copyright image over my photograph I want the background to be transparent. So I want to keep this white layer out of the action right now. So I have two visible layers. I’m going to click on the topmost layer and press Ctrl Alt Shift and E to create a new flattened version of this layer. So this is the version that I’m going to use. And now I’m going to bring in a texture layer.
So I have a texture image open here, and I think it’s a really nice texture to use. So I’ve got the texture open. And to add the texture to this particular layer I’m going to select the layer and click the Add Layer Mask icon because that adds a layer mask to the image. And now this texture has to be made the exact same size as this image so I’m going to choose Image and then Image Size. And I want to resize it to the exact same size as this one.
So I can do that by just clicking Window and just pointing to the image whose size I want to borrow. And that’s apparently the size of this image here so I’m just going to click Ok. And because it’s a texture image it doesn’t matter that I’m skewing it a bit out of proportion because nobody really knows what a scratch is supposed to look like. Having done this, and it’s critical that you resize the texture to the exact same size as this image or you can’t use this next technique, which is to apply the texture as a mask.
So I’m going to click on the mask, and I’m going to choose Image, Apply Image. And if you don’t have the texture file the exact same size it will not appear here. So it does obviously appear here so that’s exactly what I want. I want to apply the texture to the image. And at the moment it’s set to Multiply blend mode. But I can test other blend modes and I can even test inverting the layer. So I’m just going to look for the best effect that I can get here.
In fact in the tutorial I suggested that we use Hard Light. So that looks like the one that we’re going to use, Hard Light. So I’m just going to click it and click Ok. And that gives us the sort of texturize look to our shape. And again, I was going to create this as a new layer so I’ll click on this layer and again press Ctrl Alt Shift and E to gives me a newly stamped layer. Well it’s not appearing to work right now. So let’s just add a new layer and press Ctrl Alt Shift E because that will work. And then we’re going to save this as a PNG image. But before I do it I think it’s going to be cropped because I think it’s a bit too big at this stage.
So I’m just going to crop down to get rid of the bits of the image that I don’t want and click the checkmark. And now I’m going to save this but making sure that I have this background turned off because I want it to be a transparent image. So I’m going to save it as a PNG image. So I’ll choose File, Save as, and I’m going to call this HB copyright, black, and PNG. And I’m going to make sure that I select PNG from this list here. And here’s PNG. So I’m going to select it and just click Save and click Ok. And that’s now saved as a PNG image.
Having done that I then want to make it white. So I’m going to choose Image and then Adjustments and then I’m going to invert it so what was black becomes white. And now if I just test this with a black filled layer behind it, you’ll see that it’s now a white image. So we could use that to go over the top of for example a very dark image.
So having created that I’m going to turn off my background because I want this to be a transparent image, and I’m going to resave it this time as a PNG. But this time I’m going to call it white. So again, this is going to be HB copyright, and it’s going to be white, PNG. I’m going to save it as a PNG image, and Ok. And so this is now the copyright image that I can use on my images in future.
I’m Helen Bradley. Thank you for joining me for this video tutorial. And look out for more of my tutorials both on digitalphotographyschool.com and also on my own website at projectwoman.com.
Photoshop Levels offers is a simple way to fix dull, lifeless images. Learn how to apply a Levels Adjustment layer to an image, how to read the histogram chart and how to use it to fix your image in seconds.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. Today I’m going to show you a quick fix for a dull or muddy looking image. This is an image that lacks tonal range. It lacks contrast and we’re going to give it a punch and we’re going to do it quickly and easily. In this video tutorial I’m going to show you how you’re going to fix an image that looks a bit like this. This image is what I would call muddy. It actually lacks tonal contrast. There no blacks in this image. We’ve got some light pixels around the sky area but there are no blacks. And the result is that the image looks a bit foggy, a little muddy, a little lacking in tonal range, lacking in contrast and the color is a little bit flat as well. And this is the fix that we can apply to the image extremely quickly and Photoshop will actually tell us how to make the fix. It will tell us what’s wrong with the image and how to fix it. So let’s have a look and see how we’ll do this.
To start off with, with the image open in Photoshop I’m going to choose Window and then Layers because I want to see this layer’s palette. Now we’re going to choose an adjustment layer. It’s exactly the same as making an adjustment except this time it is editable, and we would like to get you started using adjustment layers because it gives you a little bit more power in Photoshop. So we’re going to choose Layer, New Adjustment Layer. And the one that we’re going to use is called levels. So let’s just click on Levels and see what we get. We get offered to add a new layer so I’ll click Ok to say yes. And then we get this dialogue here. Now this might look a little bit confusing but it’s actually Photoshop telling us what’s wrong with the image and giving us a chance to fix it. This is the pixels in the image. It’s a histogram. And what Photoshop has gone and done is it’s had a look at every single pixel in the image, how light or dark it is, and it’s counted up how many really dark ones it has and how many middle tone ones and how many light ones. And it’s done that for all the 255 tonal ranges in this image. So we got from 0 to 255. And it’s telling us how many pixels are in each of those ranges of tone. And this is black and this is white. So you see that we’ve got a few pixels very, very white and then a lot of pixels in that sort of light white area which is of course all around in the sky.
But see here, this is the problem in this image. There are no blacks. There’s nothing in this black area of the histogram. And so levels is not only telling us that but it’s also giving us a chance to fix it. So what we can do is we can drag on this slider here, the one under the chart. I want you to ignore these ones all the way at the bottom. It’s these under the chart that you’re interested in. And when you see the chart doesn’t make it all the way to either end of this histogram you’re just going to drag in until it does. And look what happens to the image as we do that. We’re just going to drag in to give ourselves some black pixels in the image, and then we can adjust this mid tone point as well. We’ll go to the right to darken the image or to the left to lighten the image. And you just need to choose for your image where the best point for that is. And we could come in a little bit here on the whites, perhaps. And certainly if the chart didn’t reach the edge then we would drag in on those whites. So you just need to read your chart and then just drag these little sliders into position. And when you’re done you can just close that dialog.
And there’s our fix. This is the before and this is the after. Photoshop showed us what was wrong with the image and gave us the chance of fixing it. Let’s have a look at another image that also has a similar problem.
This was captured in London on the London I through a fair bit of Perspex glass I should imagine. And also given that London tends towards being a little bit cloudy and gray I think that’s probably not helped this image either. So again, with the layer’s palette visible we’re going to add an adjustment layer, Layer, New Adjustment Layer, Levels, click Ok. Here’s our levels dialog, not unsurprising that we have no black pixels in this image. And in this image we have practically no white ones either. This one is a little bit different. So if we want to perk up the whites we can just bring in this slider here to lighten the whites and stop them being gray and make them white, things like the clock face here and some of the areas around here, this white building probably here. And now let’s drag in on the black slider to get some blacks and then we could adjust the mid tone if we wanted to darken the image or to lighten it and again, it’s to your taste. When you’re done, click the Close button. This is how the image started out and this is how it looks now. And that fix will take you 30 seconds.
Now the benefit of using adjustment layers, if I double click on this you’ll see that it opens up again. And if I think that I haven’t darkened it enough I can darken it up now and close it. So I’m not bound into this fix. I can remove it if I want to or I can double click it to adjust it and just improved it a little bit if I think I haven’t got it perfectly right.
I’m Helen Bradley. Thank you for joining me for this video tutorial. If you liked the video please click the Like button. Consider subscribing to my YouTube channel to be advised when new videos are released. And visit my website at projectwoman.com for more tips, tricks and tutorials on Photoshop, Photoshop Elements, Lightroom and other applications.
When the light is lacklustre because the weather is overcast it is often a bad time to shoot in colour because the colours are bleak and uninteresting.
These are times when black and white works particularly well because, by removing the colour problems, you can focus on the interesting things in the scene.
If the scene is monochromatic anyway and even flat but shooting it in black and white you can reinforce the desolation and age of the scene.
However, that’s not to say that a sunny day or sunrise and sunset is not also a good time to capture photos in black and white – when the sunlight is strong, the contrast between areas of light and shadow become very obvious and black and white is a wonderful way to capture this.
When the sun goes down, a world of different lights opens up and it’s a great time to pull out your camera for some stunning photos. However, before you go out to shoot at night, there are some things to think about that will help you take great shots even when the lighting isn’t ideal.
Today we’re starting a new tip series – shooting right at night and here’s the first tip:
Make light or capture what little there is
At night, there’s obviously less light than there is during the day. So, to get good shots you either have to replace the missing light with a flash, or open up the aperture so more light gets in and slow the shutter speed so the camera gets enough light to register the image. You can also up the ISO – in the next few tips we’ll look at each of these options in more detail and find some great topics for shooting at night.
