Find Lost Details Hidden in Shadows and Darker Parts of an Image
When you have an image that has details lost in the shadows or darker areas of the image, the Fill Light slider in Lightroom 3 or the Shadows slider in Lightroom 4 can be used to recover this detail.
Don’t use either of these as a tool for lightening an image or to lighten shadows if there is nothing interesting in the shadows. Use them instead when you want to get some interesting detail out of the shadows.
The result of using the Fill Light and sometimes using the Shadow tool is that some contrast in the image will be lost – so you nay need to increase Contrast as a result of using the Fill Light slider in Lightroom 3 or apply a tone curve adjustment in Lightroom 4.
Learn how to create uneven lines that look hand drawn to use for cartography and other uses in Photoshop. Make use of Hue/Saturation adjustment to add vintage color, use brushes to create a pattern for the lines. Also, show how to render lines in black and white without any shades of grey and, lastly, how to distort them slightly. This video also shows how to add shadow around land mass and multiple lines of edging for a land mass.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you some line drawing techniques for creating maps in Photoshop. In this video I’m going to show you how you can create the effect that we have here around the edge of this chart. We’re going to draw the edge. We’re going to add this shading and also create these lines so that we can see how this could be created. The pattern in the middle is just a very simple pattern fill. We won’t be covering that, but we’ll be covering everything else in this video tutorial.
So to get started I’m going to start with a new image. And I’m going to choose File and then New. And I’m going to create a very tall image. So it’s going to be 2,000 pixels tall, RGB color. Background contents of white is just fine, so I’ll just click Ok to create that image.
And what I want to do first of all is to create these lines. And we’re going to do that using a paintbrush. So I’m going to click on the paintbrush and let’s select a brush to use. And what I want is something relatively small so I’m going to start with something like this 4 pixel brush. And then I’m going to choose Window and then Brush to open this brushes panel here. And what I want to do is to set up the brush so it’s going to paint the lines for me. So first of all I’m going to adjust the spacing so that there’s increased spacing between the brush tips. And I’m going to leave the size at about 4 pixels. Then I’m going to shape dynamics because I want the size of the brush to vary.
So I’m going to increase this quite a bit so we start seeing that there’s some variety in the brush here. Minimum diameter I don’t want to change at all. And that’s pretty much all I need to do with the brush right now. And then I’m going to test it. So I’m going to make sure that I have black set as my background or foreground color, which it is here. And then I’m going to click with my brush here and I’m going to Shift click at the bottom because that will create a straight line of brush strokes. And let’s just have a look in here a bit closer at this.
You can see that we now have this sort of dotted line which is different varieties of line. Now if that’s not quite what I want I can just zoom out and we can start again. So I’m just going to undo the brush and perhaps we’ll go back and make the brush just a little bit bigger than it was. So let’s go to brush tip shape, increase the size just a little bit, and perhaps bring down the size jitter or up the minimum diameter so that we haven’t got quite so much variety in our brushes. I’m going to click here and then Shift click to finish my brush stroke.
Now what I want is a sampling of this. So I’m going to use this tool here which is the single column marquee tool, one of the few times you will ever find a need for this particular tool. I’m going to zoom in here so that I can see exactly what I’m selecting and I’m just going to click to select a single line through this image. Now that’s not the world’s best. So let’s just try again. My brush stroke is not completely vertical so that’s causing me some problems here. Let’s start this again. I’m going to click here, and again let’s Shift click to create a straight line. And let’s see if that’s a bit straighter. That will be when we click just to one side of it. So that’s going all the way through the dot.
So I’m just going to choose Edit and then Define Pattern because this is going to be a pattern. And it will be just this dashed line as our pattern so I’ll click Ok. I can now close this image because I don’t need it any longer. And let’s see how our pattern will work.
I’m going to create a new document, this time 2,000 by 2,000 pixels in size. And this time I’m going to fill it. So I’m going to choose Edit and then Fill. And I’m going to fill it with a pattern. So I’m going to select Pattern. And the very last pattern in this container here will be the pattern we’ve just created so I’ll click Ok. And there are our lines. And that’s a starter for our map.
Now with our lines we can make these bigger. So I’ve got a background layer here but I can click to make it into a regular layer. And we can just enlarge this. So if we want larger lines all we need to do is to just drag up and down on this to just make the lines a whole lot wider than they are. And because they’re lines we can just size everything like this.
If you want to make sure that that there are no gray areas to the lines, as you can see they’ve got slightly fuzzy sides here, just use Image and then Adjustments and then Threshold. And that just makes the lines black and white. They’re pure black and white now. And if you want a bit of variety, Edit, Transform and then Warp. And you can just adjust the lines with a little bit more of a curve or something through them so that they look a little less like they’re straight lines and perhaps a little bit more hand-drawn feel about them, Ok. Now let’s add our map part.
So I’m just going to grab the Lasso tool and for this exercise just draw a very wiggly sort of coastline that we’re going to use for our map. And white is my foreground color so I’m going to Alt Backspace, Option Delete on the Mac, to fill this with white. Now I want an edge around here so I’m going to choose Edit and then Stroke. And I’m going to stroke the edge with black. I’m just going to get all my tools over on this screen. So I’m going to select Black. And I’m going to make this a 6 pixel to begin with. And it’s going to be on the inside of this shape so I’ll just click Ok. And there’s our 6 pixel stroke.
Now I’m going to bring in this size. So I’m going to choose Select, Modify, Contract and I’m going to contract this by 10 pixels because I think that will be enough and then add another stroke. So again, Edit, Stroke. And this time I’m going to just use a 3 pixel stroke, but again on the inside. And then we’ll repeat that again, Select, Modify, Contract by 10 pixels and then repeat the stroke, Edit, Stroke and just click Ok. And then when I press Ctrl D you’ll see that we have the edges around here. But I’m actually just going to undo that Deselect right now because I have another piece to go in here.
What I want to do is to fill this shape with the grass so I have that as a pattern. So I’m going to choose Edit and then Fill, and again still pattern but here is my grass pattern here that I created earlier. And I’m just going to fill it with the grass pattern. Now we’re going to see how to create the shading around the edge. So I’m going to deselect the selection. I’m going to make sure I’m selected on the land, which is where the shading is to go, and I’m going to choose the Add Layer Style button here. And we’re going to choose an outer glow.
Now outer glow sounds like it should add some lightness around the edge but we can use it to add darkness. All we’re going to do is to select a dark color. Well we’ll stick with black right now. Now we can’t use screen as our blend mode. We’ll have to use something that will darken. So we’re going to choose multiply. And we’re going to set this if we want it to be full strength at 100 percent opacity. And we can adjust the size which is really the feathering around here. And the spread is how big it is. It would sound better to me if spread were really the feathering and size was the actual size. But that’s what you’re going to use.
So I’ll just click Ok. And now if we want to add this sort of sepia tone to the image, I’m going to make sure I have the image selected, and we’re going to do that with the hue/saturation adjustment layer, Layer, New Adjustment Layer, Hue/Saturation, click Ok. We’re going to select Colorized because we want to colorize this. And then we’re going to go and pick up our sort of brown color, increase the saturation and adjust the lightness. And you’re just looking for that sort of effect that is going to say vintage map to you. So I’m probably just going to select that for now.
And then I would finish off by cropping my image. We probably don’t need quite as much sea visible. In my image I have a one to one crop set here. That’s why it’s behaving a bit strangely. And there is our final result.
We’ve created lines using a brush in Photoshop. They’re all different size lines and we’ve created this sort of effect of an old-fashioned map. And actually if I just drag this adjustment layer up over the top of the fill we’ll really get that look of a vintage map.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my Photoshop tutorials on this YouTube channel. Subscribe to the channel. If you enjoyed it please comment and like this video. You’ll find more videos, tips, tricks and tutorials at my website at projectwoman.com.
Learn three must know blend modes for Photoshop and in particular for editing photos in Photoshop. Covers how to use Screen, Multiply and Overlay blend modes.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’ll introduce you to the three must know blend modes in Photoshop. I’ll explain how they work and how you might put them to use.
There are three blend modes that it’s really handy to know how to use in Photoshop, and we’re going to look at those three blend modes in this video tutorial.
In this particular image I have a picture of a building in Darwin and over the top of it I have a second layer. And on the right hand side is the exact duplicate of the layer below. And on the left hand side is just the color pink because we’re going to have a look and see how these blend modes work not only with images where you’ve got two layers that are identical but also what happens when you have for example a layer that is different. And the three blend modes that are really handy to use are got to by clicking this blend mode dropdown list in the layers panel in Photoshop.
If you can’t see your layers panel choose Window and then Layers and that will show you your layers panel. When you’re using blend modes you’ll always use the blend mode on the topmost layer or the layer that you want to affect. And it will affect how this particular layer blends in with the layer or layers below.
The first blend mode we’re going to look at it is this one here. It’s Screen. Now you’ll see that the blend modes here are grouped together. The blend modes in this particular group are the lightening blend modes. They are lighten, screen color, dodge, linear dodge and lighter color. And we’re going to look at screen in this particular group. And screen always lightens an image. So you can see here that the image is lighter than it was in the original. Here it’s colored this sort of pink tone. And here we’ve just got the original image over again, but it’s a lighter version. This is a blend mode that you can use to salvage an underexposed image. If you’ve got an image that doesn’t have enough light in it, you could use the image on each of the layers and then blend the top one into the bottom using the screen blend mode. And that will lighten the image and bring detail out of it.
The next blend mode we’re going to look at is similar but works in the opposite way. This is a darkening blend mode. And it’s accessible from this darken group of blend modes: darken, multiply color burn, linear burn and darker color. And in this case the one we’re going to use is multiply. And multiply darkens the image. You can see that we’ve got a darker version of the image with this sort of pink overlay. But here where we had the image on the two layers, the exact same image on each of the two layers, you can see that we’ve got a darkening of the image. This would be useful if we had an overexposed image. If we put the overexposed image on two layers and then blend them together with the multiply blend mode, we’ll bring back some of the detail in the overexposed image.
The other of the blend modes that you’ll typically use in Photoshop is overlay. It’s in this group of blend modes, and it’s one of the contrasty blend modes. What this does is it lightens everything that is lighter than a mid-gray and it darkens everything that is darker than mid gray. So it’s a nice contrasty blend mode. Let’s have a look here at what it’s doing to the image on the right. You can see that this is a flatter sort of image. And when I turn on this layer we’re getting a lot more contrasty image. And that’s what’s happening on the left too is we’re getting a contrasty, a colored version, of the original image. Anytime you want to boost the contrast in an image you can use the overlay blend mode.
So the three blend modes that I suggest that you look at using with your photos in particular are multiply to darken, screen to lighten, and overlay to add some contrast and punch. Now if you find that a certain blend mode is too much let’s just get rid of this particular layer and let’s duplicate the image itself. And let’s go and use the overlay blend mode. And if this is too much of a contrast enhancement to the image all you need do is to back off the opacity of this layer. This will give you some of the layer below and some of this additionally contrasty layer so that your image gets more contrast but perhaps not as much as it would have if you’d had this layer at 100 percent opacity.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel. Comment on the video and like it if you like it. And look out for more tips, tricks and tutorials on Photoshop, Lightroom, Illustrator and a whole lot more at my website projectwoman.com.
I like Photoshop to open and “look the way I want to see it”. But sometimes ‘the way I want to see it’ is different than others. I’m fickle – but thankfully Photoshop plays nice with me – the secret is its Workspaces. These Workspaces let me preconfigure my Photoshop screen for various scenarios, to save them so I can reuse them, and to put everything back in its place when I mess them up.
If this sounds like something you could use – here’s how to give your Photoshop window a custom look with workspaces.
The first thing I do is to set up Photoshop the way you want it to look and that means hiding all the panels you don’t want to see and displaying those that you do.
Then arrange them on the screen exactly the way you want to see them. For me, I prefer my toolbar to be in two columns rather than one long one. I like my layers and paths palettes visible but not much else.
Once the screen is organized the way you want it to look, from the dropdown list in the top right corner choose Essentials > New Workspace and type a name for the workspace. Select the options for keyboard shortcuts and menus select and click Save.
You can repeat this process, if desired, and create other workspaces. You might make one for photo-editing, one for collage, one for illustration or one for videoing depending on your own personal needs.
In future you can set up your screen by choosing the workspace of your choice from the dropdown list.
If you move things around and things go a bit crazy it is easy to reset a workspace back to how it was when you last saved it.
To do this, first make sure you are viewing the workspace to reset and then open the Workspace menu and choose Reset .
Likewise you can return to Photoshop’s default workspace anytime by selecting Essentials then click Reset Essentials.
And one last word on workspaces…
If you want to see what’s new in Photoshop CS6 click the New in CS6 workspace and you can see what is new in Photoshop. Open a menu and any new options in it will show as blue on the menu.
Learn how to combine two images to make a collage. Includes use of Blend modes in Photoshop, color range color selection, clipping mask, layer mask, hue saturation adjustment layer, drop shadow layer style.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can create some simple collage effects using blend modes in Photoshop. This is the effect that we’re going to create in this video tutorial. I’m going to show you how you can put the pieces of this together in just a few minutes using a couple of images and some blend modes.
We’re going to start off with this image and another one that I shot at the neon boneyard in Las Vegas, and that’s giving us the texture. And we’re going to combine these two images with a blend mode. And then we’re going to extract the color from this original image, this sort of orange color. And we’re going to recolor it using a Hue/Saturation adjustment layer. But if we wanted to leave it at this point we could leave it just with that additional color. And we’ll also going to add a drop shadow with a different color behind it.
So let’s see how we would create this effect. And I’m going to start with my two images, and I’m going to put one image into the other. So I’m going to grab this neon boneyard image and I’m just going to drag and drop its background layer in on top of this original image. I’m just going to size it so that it’s right over the top. And the first thing I would do with a collage like this is look and see what sort of opportunities I had with blend modes.
So I’ll generally select the first blend mode in the list, Dissolve, which generally gives me nothing at all. And now I can just arrow down and see what happens when I click on each of these blend modes. And all I’m looking for is something interesting. And you’ll generally get a better effect with this if you use images that are a little bit more textural and a little less like something where you don’t really particularly want to bring out of the image exactly what was in it. But you want to discover how these two images can interact with each other and what you can do with them as they interact. So that’s all the way down through the blend modes. And so I’m going to go back up and I’m going to settle on something that I want to use. And generally the most interesting bits are going to be in the overlay or the contrasty area. So in this area and sometimes even with lighten and darken.
So let’s just go up through these and find something that we like. And I’m thinking actually I might like something like this perhaps with the Opacity dragged down a little bit. Now what I want to do is to bring out the orange color in the original flower so that I can lighten them a little bit in this layer here. And what I’m going to do is create a duplicate of the background layer. And I’m going to drag it above the image. So right now all we’re seeing is this original background. And what I want to is to select the leaves in it.
Now the leaves are really bright colored here. So I’m going to choose Select. And in this case I’m going to use Color Range because it’s going to be the easiest way to select these leaves. Now either I can select on the sampled color and add to it this way by just clicking on these leaves or I could use just the reds and just grab the reds. But I think Sampled Colors is actually going to give me a slightly better effect here.
So let’s just go back to this and let’s choose Sampled Colors here and just click Ok. Now that has isolated the leaves here and what I want to do is to keep these leaves but drop the rest of the image out. And I’ll do that with a mask. And because my leaves are selected, all I need to do is to click on the Add Layer Mask icon. And what happens is that the leaves are then masked and left behind and the rest of the image is just dropped away. So this is the before and this is the after. And you can see we have brought in the color from these leaves.
Now if we wanted to we could even lighten this color. We’ve got some of the orange color in. But we may want to brighten it up even more. So I’ll make sure that my image layer is selected and choose Image, Adjustments. And then I could use levels or curves. I’m going to use levels, and I’ll just lighten this is a little bit and click Ok. Now in the earlier image that you saw we had actually colored these blue and it’s very easy to color them blue.
To do that we’ll choose Layer, New Adjustment Layer and we’ll choose a hue/saturation adjustment layer and just click Ok. Now I want this adjustment layer to only affect the red leaves so I’m going to clip this. So with this adjustment layer selected I’m going to choose Layer, Create Clipping Mask. And so anything that I do to this adjustment layer here is only going to affect the layer below, just these red flowers. So now let’s double click on the Hue/Saturation adjustment layer and now we can go and make some changes to it. And I’m looking for a blue color which will either be at this end or this end of the hue slider. So I can get to either this sort of greeny blue if I wanted or I can get to a sort of purplely blue. I’m thinking the greeny blue will be pretty good here. And now I can adjust its saturation and its lightness from here. So when I have what I like I’m just going to close that dialogue. So that has recolored those leaves to a bluey color.
And finally let’s add a drop shadow behind the leaves. So I’m going to select the leaf layer, and I’m going to choose a drop shadow effect. Now drop shadows might start out being dark but they don’t have to end up being dark. So what I’m going to do is go and find a really cool color for this drop shadow. And I’m thinking a really, really bright pink will do me. So let’s choose that. And I want to up the opacity of this. I could set it to normal so it’s going to be a very, very pink shadow. And then I’m going to adjust the settings for this. Spread is going to be the size of the shadow and softness or size is going to give me some softness. But there’s a very small sweet spot here on this that I can very, very easily exceed. So I’m just going to add my shadow in. And I think I’m going to multiply blend mode my shadow, not apply it with the normal blend mode. Although I could use normal for example with a much lower opacity if I wanted to give it this sort of pinky color. I might leave it at that.
So there’s a way of creating some interesting collage effects. And all we’ve done is grabbed a couple of images and put them on top of each other and blended them with something that counts as being an interesting blend mode. And then I isolated the orange flowers in the image and brightened them up. I also added a drop shadow in a very contrasty color. And I added to a hue/saturation adjustment layer that only effects these orange flowers to use the brightness of them but to color them a different color. And you can do all sorts of things by just combining images. And that gives you lots of practice at making color selections, using clipping masks, using masks, using blend modes and just having a little bit of playtime and a little bit of fun creating interesting effects in Photoshop.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel and please like and comment on the tutorials if you would. Also visit my website at projectwoman.com where you’ll find more tips, tricks and tutorials on Illustrator, Lightroom, Photoshop and a whole lot more.
Learn how to crop and resize in bulk in Lightroom. If you have a lot of images you need to, for example, crop to 5 x 7 and then save at a particular pixel size and resolution, you can learn how to do this quickly and effectively in Lightroom. This makes use of the tools in the Quick Develop panel in the Library module.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can bulk crop and resize images and export them from Lightroom.
A reader recently posed a question to me and that was what do I do if I need to crop all my images to 5 by 7 in size and get them out as 500 by 700 pixel images. In Lightroom that’s not that difficult to do. What I suggest you do is you do it from the Library in Quick Develop mode. So I’m going to select the images here and then I’m going to select Crop Ratio and I’m going to choose 5 by 7. And that will crop all of these images to 5 by 7 images. But look what it’s done with the verticals. It’s cropped them to 5 by 7 but it’s kept that same vertical alignment.
So now let’s go to the Develop module and just see what we’re seeing here. This is the crop marquee. And you can see that this image, each one of these images in fact has been cropped to 5 by 7. And let’s go and find a vertical crop and see how it’s been cropped. Again, it’s been cropped to 5 by 7 but in a vertical direction. So this means that all of these images have automatically been cropped.
All we would do is have a quick look and make sure that important parts of the image have not been cropped off. If these were people we’d have a quick check to make sure that somebody’s head hasn’t been chopped off for example. And having done that now knowing that everything is cropped to 5 by 7, to export these images at 500 by 700 pixels in size or 700 by 500 we would select all of them by clicking on the first and Shift click on the last. I’m going to right click and choose Export and then Export again and we would just set up the Export option. So here I’m going to put this in a folder called 5 by 7.
I don’t want to rename these files. All we want to do is to resize them. But what I do want to do is I want to select Resize to Fit. And the longest edge since I know that these are all 5 by 7s is going to be 700 pixels and the resolution I can set to 100 pixels per inch. So these are then going to be 5 by 7 images at 100 pixels per inch resolution. And all I need to do is to click Export and Lightroom is going ahead and it is cropping and resizing all of those images so that they are all going to be the exact right size that we chose. And here they are including the ones that were verticals. You can see that these are 500 by 700 pixels in size. This one is 700 by 500 because it’s a landscape image.
So in Lightroom you could batch resize and export these images in just a matter of a few seconds by just choosing the right option. And that is here in the Quick Develop module setting a crop ratio for those images. This is not something you can do easily in the Develop module, but it’s something that you can do very, very simply here in the Quick Develop area of the Library in Lightroom.
My name is Helen Bradley. Thank you for joining me for this Lightroom video tutorial. If you liked the tutorial please comment, press the Like button, consider subscribing to my YouTube channel. You’ll also find more of my tutorials, tips and tricks on my website at projectwoman.com.
Learn to create a monochrome stamp effect from a photo in Photoshop. Includes using filters such as Posterize, black and white, threshold and the Photocopy and Stamp filter to adjust the image to get the effect. Also see how Dodge and Burn can help you fine tune the effect.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can convert an image so that it looks like a stamped monochromatic image.
Before we get started on this tutorial this is the effect that we’re looking for. I have an original bird image here and what we’re going to do is to firstly get rid of the background around the bird. And then we’re going to convert it to black and white. We’ll posterize it and then we’ll apply a filter to it. And finally we’re going to apply the Threshold Adjustment. And we’re going to end up with this sort of stamped monochromatic effect from an original photograph. So let’s just hide that and let’s get started on the image that we’re working with. And I have a duplicate image sitting here.
Now I’ve already gone ahead and made the mask for this image so that we’re not wasting a lot of time cutting out the bird. But essentially what I would use is the Quick Select tool to just select over the bird. And then I made a duplicate of the background layer by just dragging it onto the New Layer icon and then just clicked this Layer Mask icon and that adds a layer mask to the image. So there’s the bit that we had selected. Then obviously I would make a much better selection and this would give me my isolated bird here.
So the next thing that we’re going to do is to convert this to black and white. So I’m going to click on the topmost layer and we’re going to do this using an adjustment layer. The reason for this is that it can then be redone later on if we don’t like the effect. So I’m going Layer, New Adjustment Layer, Black and White and click Ok, and here is the black and white adjustment.
Now what I’m looking for here is that we’re going to make this into a pure black and white only image later on so I want plenty of detail here. So I’m just going to walk these sliders in either direction to see where they go. And I want some edge detail because that’s going to define the birds so I probably want to bring the blue channels and the purple channels over towards the black. And let’s just see where the red gets us. I want to definitely see the bird’s eye so I want that to be different to the colors surrounding the bird. So I’m just looking for a reasonably good black and white conversion at this point, and I’ll just close that down.
Next we’re going to use Layer, New Adjustment Layer, Posterize. And what the posterize adjustment does is it flattens the image to a certain number of colors. They’re called levels but here we’ve got four levels of lightness and darkness. So if we had a color image we’d have four colors. And we can wind this up to a sort of surrealistic amount or we can take it back to a less realistic, more stylized amount. And that’s exactly what we want here.
But you’ll see that every time you change this it has different affects around the edge. So the difference between 5 and 7 and perhaps 6 and 5 is really quite significant. So I’m looking for a number of levels that gives me a good result. I’m worried about the eye disappearing here. Three is not enough. Four is a whole lot better. I really quite like that four so I’m just going to let that be what we’re using here. At this point if we were not getting the exact result that we like we could go back and dodge and burn on this layer. So we could grab the Dodge or Burn tools here to darken and lighten the image by clicking on these, taking the highlights, just make the brush a little bit smaller and perhaps brush around the edges here to darken it up which will ensure that later on we’re going to get some dark edges around the edge of our bird. So if that’s of concern to you selecting a tool such as Dodge or Burn will allow you to lighten and darken the areas around this bird that you want to have lighter or darker.
So for example if we really wanted to see this eye we could lighten the areas around the eye. So you can craft that to an extent using the Dodge and Burn tools here. So I’m just going to burn in a little bit around the top of the leg and the sides of the leg here, and perhaps just under the belly. So once we’ve done that I’m going to come up to the topmost layer and I’m going to make a flattened version of the image so far. And I do that by holding Ctrl and Alt and Shift and E, that’s Command, Option, Shift E on the Mac. And this gives us a flattened version of this that we can now apply a filter to.
I could use smart filters but the filter is just going to be fine for this. So I’m going to choose Filter and then Filter Gallery but before I do this I’m making sure I’ve got black and white as my foreground and background colors because the filter set that we’re using relies on black and white for the color. So if you don’t have black and white selected as the color it’s not going to be a black and white effect that you’re going to end up with. So I’m just going to drag this back in. And I used the Photocopy earlier, and I found that that was a really good result for me.
But you could also try the Stamp and see if in the light and dark balance you can get what you want with the Stamp. We’re going to get pretty much the Stamp effect by just using the Photocopy. But I’ve got a way of getting rid of these sort of almost blurry sort of gradient detail in the bird’s back. So I’m going to ignore that for now and just go for a good sort of stamped effect. I’m looking at the blacks and the whites in this image because that’s essentially what I’m going to get at the end of this. So I’m going to say that that’s good and click Ok.
And the final tool that we need to make these areas disappear is a Threshold Adjustment. And again, I’ll do this using an adjustment layer with Layer, New Adjustment layer and then Threshold. Now Threshold is an unusual sort of filter. What it does is it turns everything either pure black or pure white. There is no in between. And this selector here tells Photoshop at which point we want the colors to go to white or to black. So if we wind this back down a little bit we’re going to get rid of some of these areas in here and they’re become darker or lighter according to how we have this selected.
So I’m just going to go around about that midpoint because we do have this as an adjustment layer which means that if we make changes to this layer they will affect the adjustment layer. So I’m just going back to the Dodge tool here and just see if I can get rid of the very obvious sort of circling effect here, so I’ll just make that a little less obvious that that was something that got left behind with the Photocopy filter. Let’s just bring the exposure right up. And there’s our finished bird there. And we can do whatever we like with it.
You may want to save it out so that you could use it perhaps with a background color or something like that. But there’s this sort of stamped monochromatic effect created in Photoshop. And it’s done very easily by first just isolating the object and then converting it to black and white in a way that gives you the contrast that you want, posterize it to flatten it to some levels of color or levels of tonal range, create a brand new layer from that and apply a Photocopy or Stamp filter to it and then finally finish off with the Threshold Adjustment.
I’m Helen Bradley. Thank you for joining me for this video tutorial. If you liked the tutorial please Like it and comment on it and share it with your friends. Look out for more videos on my YouTube channel and visit projectwoman.com for more tutorials on Photoshop, Photoshop Elements, GIMP, Lightroom, Illustrator and a whole lot more.
Learn how to make an image its own mask using Apply Image in Photoshop.
Here we use an image of a cast iron grill and apply it to itself to show another image through it.
Transcript:
Hello I’m Helen Bradley. Welcome to this video tutorial. In this tutorial we’re going to look at using an image as its own mask in Photoshop. And we’re going to do this using the Apply Image tool.
Before we get started with this tutorial let’s have a look and see what it is that we’re trying to achieve. I have an image here that’s just some oranges and then I have another image here of a grate. And what I want to do is to put the grate over the oranges just as I’ve done here. And I’ve actually got a drop shadow behind it to give it some dimension. And what we’re going to do in this tutorial is see how we can use an image and use itself as its own mask to mask that image and how we can also adjust the mask so that we get this effect that we’re looking for and adding a drop shadow to it. So if you’re ready let’s just get rid of the bits that we don’t want. I’ve now got my orange image and let’s get started.
The first thing I’m going to do is bring in my grill image. So I’ve got these images just floating loose because I find that the easiest way of doing it. And I’m just going to drag this image’s background layer away from it, hold the Shift key and just drop it over the top of this image. Now of course it hasn’t disappeared from its original image. I’ve just dragged a copy away. And I don’t need that any longer so I can just get rid of it. With this image it’s a little bit on the small side, so I’m going to press Ctrl T and Ctrl 0 (zero) to see my handles and to set transform on. I’m also going to enabled this lock so that the ratio between the height and width is fixed. This means that the image is not going to be skewed out of proportion. And now I’m just going to drag it into position and I can place it anywhere I want. So I think this is a pretty good arrangement so I’ll click the checkmark here.
Now right now we’re not seeing through this image because of course it brought its own background with it and it’s got a sort of dark background with some light aspects. We’re going to need to do some work to fix this image up. And in actual fact the work that we’re going to do is in masking so I’m just going to drag this up a little bit. What I want to do is I really want to turn this image into its own mask.
So once I’ve got it in position it’s fairly critical that I actually get it in the right position before I start because I want the mask and the layer to be in the same place. I’m going to add a layer mask to this layer by just clicking the Add Layer Mask icon. But what I want to do is put this image in this mask. And an easy way to do that is to click the mask itself and use Apply Image. It’s up here, Image, Apply Image. And what it lets us do is to apply an image as a mask. So for example layer zero is the oranges themselves so that in this case we would be applying the oranges as a mask. But we can also select layer 1 which is applying this particular grill as its own mask. Now it’s not looking good right now but it is certainly masking it. I could invert it if I wanted to but that’s only going to give me the orange images over the grill work not where I want it. I want it in the bits in between the grill work so I’m going to disabled invert because I don’t want it inverted. If I’ve got that right I’m just going to click Ok.
Now the problem with this mask is that this particular image is not black and white. It’s not. Let’s just turn everything off here. You can see that this is actually really quite gray. And for the mask to really be doing its work it needs to be almost black and white. So I need to boost the contrast up on the mask alone. So I’m going to click the mask to target it so any changes I’m making now are to that mask alone. And I’m going to choose Image Adjustments and Curves because curves will allow me to adjust the mask and have a look here on the mask itself as I work. What I’m doing here is I’m increasing the whiteness of the mask and then I’m increasing the black areas. The whiter and lightest areas are going to ensure that we can see the grill in these places. And the black the darker black areas are going to cope with the areas that we’re seeing through. So I need a fairly sharp change from black to white and I also need to make sure that my sharp change from black to white copes with the fact that there’s a sort of darker gray bar behind the image. And I want to make sure that that dark gray bar goes to the right color. It needs to go to black and not to white. And what I’m looking for here is to make sure that I can really see the image through this grill, and when I’ve got it I’ll click Ok.
Now if I wanted to I can lighten my grill. That’s fine. I need to make sure that my mask is black and white so that the image behind is being shown through and then if I want to change the actual grill itself well then I can add an image adjustment to that. But the two are very different adjustments. One is adjusting the grill color itself and the other is changing it as it appears as a mask over that original grill image. So if I want to make that a bit more light I can do so just to add that extra contrast. And now to add a drop shadow to push the orange image behind that grill I’m just going to click on the grill layer and choose Drop Shadow. And here’s the default drop shadow. Well that’s what you would see as a default drop shadow. And I can add as much or as little drop shadow as I want to push that behind and gave us the sense that there is a dimension or a distance between the grill and the actual orange image itself. And we can make that deeper or less deep as we want to and then click Ok.
So here we’ve used an original image of some oranges. We’ve added an image of a grill and we want to see through the holes in the grill to the image of the oranges behind. And we’ve done that using the image as its own mask so it’s showing us where we want to see through. We’ve added a lot of contrast to this so this mask is almost pure black and white. The image itself can be anything. We just gave it a little bit more of a pop by making it a little bit brighter but it could be anything. And we’ve finished with a drop shadow to add some dimension to the entire scene.
I’m Helen Bradley. Thank you for joining me for that this tutorial. Look out for more tutorials on projectwoman.com and on this YouTube channel. And please if you liked the video click to like it and consider subscribing to this YouTube channel.
Learn to use Masks in Photoshop. Here we look at how to collage a series of images together, using masks in Photoshop.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial we’re going to look at Masking 101. So we’re going to get you started with masks in Photoshop.
In this introduction to masks I’m going to show you how you can use masks to create images like this collage image. This collage image has been built up from a number of images and they’ve all been masked so that everything can appear nicely on top of each other.
The first image was the tail end of some cows and then I added an image of a tree. And this image has been masked so that we can see part of the cows’ tails behind it. But you can see that these two images are sort of blending into each other with this mask effect. Then we have the cow by herself and again we’ve masked her so that we can see the image of the tree behind her. And then we’ve added an image of some hay over here, and again added a mask to the hay image around the edge of the cow so that we’re getting this sort of almost seamless blended effect all the way across the image. And then we’ve got some milk cans and then finally we had some different effects that sort of tied the whole thing in together. But we’re going to have a look at masks and we’re going to have a look at it doing the last three images in this particular collage, just seeing how that would have been put together.
So I’m going to open the images. I’ve got a couple here open already. I’ve got the milk cans and the hay and let’s just go and get the cow. And I’m going to create an image that these will all going into. I think a thousand pixels is a bit too big so let’s try 800. And to start off with I’ll just drag and drop these images in. But this cow needs to be flipped first of all because I had her flipped in the original. So I’m going to flip her there and then just drag her in here. I’m just dragging on the layers and then just pressing V for the move tool so that I can move her into position. I’m holding Shift as I scale her up to full size. I don’t want to save the cow image. I want the hay image now so I’m going to drag and drop it into position. And I’m going to make sure I’ve got a fairly hefty overlap here because the overlap is going to allow me to blend these images together. And finally the milk cans and drag and drop them into position. And that’s a pretty big image too. I think actually it’s much bigger than the others. I’m pressing Ctrl T and then Ctrl 0, that’s Command T, Command 0 on the Mac, to just re-size these milk cans and just drag them into position.
So I’ll start off with a collage like this by just grabbing my images and just pulling them into position with a nice hefty overlap. And in this case I’m going to crop these images so that we don’t have anything extra hanging around. And now let’s go ahead and do the blending. And I’m going to do this by first looking at this layer here the cow and the hay. So I’m going to zoom into this area so that I can see what I’m doing, move the image across, and I need to mask this hay layer.
So to do that I’m going to click the Add Layer Mask icon here and that adds a mask to the hay layer. I need to have that mask selected. I need to select a brush to use. I’m just going to make sure that I have a brush here. I’m looking for a sort of solid-ish brush. This is a hard mechanical 38 pixels. Now it’s too hard but I can soften it by just taking down its hardness to make it nice and soft. And then I’m going to make sure that my mask layer is targeted and I’m going to set these colors here to their defaults by pressing the letter D.
Now we can already see that if this mask is white we’re seeing the hay. So that means if I want to see the cow I need to paint on it with black. So I’ve got black paint now. I’ve got the mask targeted and I’m painting on the mask where the cow is to bring the cow back in through the grass. Now I’m not going to be a 100 percent fussy at this stage because one of the benefits of using masks is that we can come back later on and edit it. So I’m looking for the edges of the cow but I’m not worried that I’m getting a bit of extra green here because I want to know where her edges are so then I can get a little bit closer to her in a minute. So I’ve got her pretty much there.
Now I just need to neaten it up. And to neaten it up I’m going to switch to white being my foreground color. I’m going to get a much, much smaller brush, make sure I’ve got my mask targeted and I’m going in close to the cow’s face here to make sure that I get an edge that gives me none of this green because it’s a really, really bright green that she’s standing on. And it’s not really doing a lot. The hay image I think is the prettier image. So again I’m just going to get close in to her here. Now this might take me half an hour to do to get a really nice result and the sort of result that I want. And I can also start working with a larger softer brush so I can make sure that I have it even softer. And I can work with a lower opacity if I want to and I can even paint in mid gray because with masks you can paint in black or white or any shade of gray because a mask is a gray-scale image. Now I’m just having a look at these milk cans. And I think that probably there’s one too many. So before I go much further I’m going to select the milk can layer and get rid of this first one because I don’t really like it that much. Now I’m going to grab the next three, I’m just going to move them over a bit.
There’s a bit of excess image hanging around but I’m not too worried about that. I’m going to add a layer mask to this layer. So now we have the overlap. And I want to bring the grass through the milk can so I’m going to paint on this layer again in black and white. So again a nice big brush, I’m going to switch colors by pressing the X key because I want to blend these images in together. I want to sort of suggest that there’s a seamless transition from one image to the other. And I’ll do that with a very soft edge so we almost can’t see where the grass image ends and the milk cans begin. And with this particular image I found that there was enough shine on the milk cans that we could perhaps even suggest that the grass image was showing through the milk cans. And I’m doing that by just adjusting down the opacity of the brush. So I’m not painting it full opacity and I’m just tapping where I want perhaps a little bit of the grass image to appear, again to really blend these images together. And if I’ve made a mistake and if I want to go back then all I need to do is change my paint colors and I can go back and paint out the effect that I’ve just painted in. And I can do this over and over again until I get the exact effect that I’m looking for.
Masks are a handy way of blending images in a way that allows you to come back later on and make changes to it. If I were saving this masked image because I want to make changes to it later, I want to come back and work on it a little bit later, I would do so by saving this as a PSD file. So I’d choose File and then Save As and make sure that when I’m saving it, it’s being saved as a PSD image. That will ensure that the masks and the layers are all there when I come back next time. The biggest mistake you’re going to make when you’re working with masks is when you actually work on the image instead of the mask itself. So if you start seeing that you’re painting in black, that’s telling you that you have the image layer selected not the mask layer. If you’re working on a mask you really need to have that mask layer selected.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more video tutorials on this YouTube channel and visit my website at projectwoman.com for more tips, tricks and techniques with Photoshop, Photoshop Elements, Lightroom, Illustrator and lots more.
Learn how to recolor line art in Photoshop and how to change the colors very easily.
This video shows the use of the Lock Transparent Pixels option in the Layers Palette in Photoshop and also a Hue/Saturation adjustment layer.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can recolor your art in Photoshop. In this video tutorial we’re going to have a look and see how we could recolor this car and how we can do it in a way that would allow us to perhaps change the colors later on.
I’ve got the car on one layer here and the background which is white on another layer. So I’m going to add a layer between these two layers where I can start painting my colors. I’m going to select one of these color schemes that in an earlier video I created from Kuler and I’m going to just grab my toolbar here so that I can grab a paintbrush and a relatively hard paintbrush, not totally hard but relatively hard. I think I’ll just back it off a little bit here to about 84 percent. And on this layer I’m going to start laying down paint. I’ve got my opacity right down from another job that I was doing so let’s just kick that up.
Now I’m just going to paint over the areas where I want the paint to be. And how detailed you are with this and how accurate you are with it depends on just what sort of effect you want. Now I don’t want it to be quite so accurate so while I am going to erase a little bit of this I’m not going to erase all of it because I do want some over-painting. Now I could leave this layer underneath but you’ll see that there is a little bit of white there that’s showing through. I can get rid of this by going to this layer here and setting its blend mode to darken and that will darken the areas but will let the white pixels blend in with the layer below. I think that gives me a better result.
So let’s go now and let’s get another color in this color palette and let’s just go and paint here. And I’m just going to pick the paintbrush up rather than the eraser and let’s Just paint in these areas. Again depending on what sort of effect I want I may be more or less accurate and I can always come back with the eraser and just tidy up if I want to. Most of these areas of the image are also trapped so if I wanted to I could just make a selection from the original image and pour paint into them. But I don’t really want that effect for this image. I just want it to be a little bit more organic than that. And I’m going to add the orange to various portions of the image but I’m going to do it all on this one layer. So that means that later on I can come back and replace the orange with another color and every element that was orange will be replaced accordingly. So let’s just go here. I think I’ve got a slight problem with my green. So I’m just going to continue until I have my car painted to my satisfaction and then we’ll come back and see how we would recolor it.
Now I’ve finished painting the car and I’m ready to go ahead now and have a look at my options for recoloring it. One of the ways I can change the color of this image is to click on the topmost layer and choose Layer, New Adjustment Layer, Hue/Saturation. And this allows me to recolor the entire image just using a single adjustment layer. So I’m just going to drag here and then if I drag around on this color selector here you can see that all of the colors bar that sort of gray color are now changing. And they’re changing in the same relationship to each other. So that’s one of the options I have for recoloring this vehicle is to just adjust the hue/saturation of the entire image using a hue/saturation adjustment
layer and just stopping when I get to the color scheme that I want to use for example.
Now another alternative is if I want to just selectively recolor areas because I put each of these colors on a different layer I can then just change those layers. So for example let’s go and pick up another Kuler color scheme. I’m in beach ball but that doesn’t really matter too much. Let’s go and get this beach combo color scheme from Kuler. And if you haven’t yet watched my Kuler video and if you want to know how to do this then I suggest that you go and have a look at it.
Now my mouse and my video tool aren’t running very well together right now so I’m having a bit of trouble selecting this. Ok, it’s now in the Swatches panel. So I’m going to go ahead and select this blue color as my foreground color. And I want to replace this color green with the blue. Now what I’m going to do is because there’s a lot of detail on this layer and I want to replace the whole lot, I’m just going to lock the pixels on that layer. And what happens when I lock the pixels is if now I press Alt and Backspace, Option Delete on the Mac, what I’m doing is flooding just the filled pixels on this layer with that Color and so now that layer has been recolored. I’m going to select this layer and lock the pixels on it and pick up a color to use for it and then I’ll Alt Backspace, Option Delete on the Mac, to change its color.
And finally I’m going to lock the pixels on this layer and let’s go and get a color to use for that. We’ll choose this darker blue, Alt Backspace, Option Delete. Of course these layers are now locked so if I want to be able to edit them for example erasing any excess paint or making any changes to them, I’ll need to unlock them. But this Lock Transparent Pixels tool allows you to quickly isolate the contents of a layer, select a color to use for it and just Alt Backspace, Option Delete on the Mac, to immediately select and refill all the pixels on that layer.
I’m Helen Bradley. Thank you for joining me for this video tutorial. If you liked this tutorial please give it a thumbs up and feel free to comment on it. Please consider subscribing to my YouTube channel and visit me at projectwoman.com for more tips, tricks and tutorials on Photoshop, Photoshop Elements, Lightroom, Illustrator, GIMP and a whole lot more.
