Learn how to fine tune sharpening with the Amount and Radius Sliders
The Detail panel in Lightroom controls sharpening on the image. Use the Amount slider to manage the intensity of the sharpening – set this to a high value to begin.
The Radius slider adds halos around the edges in the image which is what gives the sharpening effect.
For an image with lots of fine lines and detail such as a building select a low radius. For a portrait or an image with softer detail, use a high radius value.
Hold the Alt key (Option on the Mac) as you drag on the Radius slider to see the halos.
How to prepare your image for sharpening so you can make a good adjustment
To sharpen an image, first make sure that the main image is visible at a 1:1 ratio in size so you can see the resulting sharpening effect more clearly.
To control what appears in the Preview window, click the indicator in the top left of the Detail panel and click an area of the image to preview. Choose a good position on the image as a preview – something that needs to be good and sharp.
You can also click on the image in the Preview – click once to see the preview filled with the image and again to zoom into the image.
Drag the image in the Preview window to see different parts of it.
Split Toning a Black and White Image – learn how to make the Highlights and Shadows Different Colors
Split Toning applies one color to the highlights and another to the shadows in an image.
Good color choices when applying a split tone are colors that are opposite each other on the color wheel such as magenta and green, blue and yellow, or red and cyan – although you can choose any combination you like.
To apply the split tone effect, drag on the Hue slider or click the color picker to choose a color to use for the Highlights and then choose something else to use for the Shadows.
Adjust the Saturation of the colors as desired.
Balance allows you to fine tune how the colors are applied to the image – drag to the left to adjust the balance towards the shadow color and drag to the right to add more of the highlight color.
Finally, in this post, I’ll show you how to create the watermark image to use.
This watermark has two concentric circles with text between them and a set of wavy lines making it look like a post office stamp cancellation. The watermark also has a slightly grunge look.
To make it, start in Photoshop with a letter size image. I set mine to landscape orientation with a white background. This will make it easy to create a black watermark and I will be able to see it as I work.
Add a new layer by choosing Layer > New > Layer. This is a transparent layer on which you’ll place the circles.
Start with the Ellipsis Tool which shares a position in the Tools with the Rectangle tool – it is a shape tool – don’t use the Elliptical Marquee Tool.
Make sure that the option on the Tool Option bar is set to Path and hold Shift as you drag a circle on the screen.
When the circle is in position choose Window > Paths to view the Paths palette.
Select the Brush tool and select a brush. I used a Hard Round brush sized down to around 40 pixels.
Set the foreground color to black, click the Work Path in the Paths palette to select it and then click the Stroke Path with Brush icon at the foot of the Paths palette. This strokes the path with the current brush.
Click the Path Selection Tool which shares a position in the Tools palette with the Direct Selection Tool. Click on the path and it will select the entire path.
If the transformation handles do not appear press Ctrl + T (Command + T on the Mac). Hold Shift and Alt (Shift and Option on the Mac) and drag inwards to create a circle which is concentric with the previous circle.
Repeat the process of selecting the Brush, click on the path so it is selected and click to Stroke Path with Brush.
Click the Path Selection Tool and, with this smaller circle selected, press Ctrl + T (Command + T on the Mac). Hold Shift and Alt (Shift and Option on the Mac) and drag a little outwards to create a circle path for typing the text along.
Select the Text tool and hold the mouse over this third path.
Look for the text tool to show as an I-beam pointer with a bent line through it – this tells you Photoshop will align the text along the path.
Click once to anchor the Text tool to the path. Select the text color – in my case I chose black – and select the font and font size – I used Myriad Pro – 24 points. Type the text to use – I typed:
With the text selected display the Character palette by choosing Window > Character and adjust the tracking to expand the text so it wraps all the way around the shape.
You can draw your own lines for the cancellation lines using the Custom Shape Tool. First create a new layer then select the Wave shape and on the Tool Options bar make sure that it is set to Path.
Drag to make your curved lines.
Select the Add Anchor Point Tool (it shares a position with the Pen tool) and click once in the middle of each end of the path to add a point.
Target the Direct Selection Tool, click one at a time on the Anchor points you just added and press Delete – this breaks the 3 paths in half to make 6 paths. When the Anchor is selected it will show as a dark filled square.
Select your Brush and black paint and select the path in the Paths palette and click the Stroke Path with Brush icon.
Once you’ve done this you can add a grunge effect.
Start by hiding the background layer, target the top layer and press Control + Alt + Shift + E to create a flattened layer with transparency. Hide all layers but this top one.
If the lines aren’t dark enough duplicate this layer a few times and they will darken. Then merge all these duplicated layers
To add the grunge effect click Add a Layer Mask icon at the foot of the layers palette to add a mask to the layer. Locate an interesting texture image to use such as this one from www.mayang.com/textures.
Make it the same size as your image by choosing Image > Resize, deselect the Constrain Proportions checkbox and click Window and click your copyright image file to use its dimensions. Click Ok.
Now return to your Copyright image, click the mask to target it and choose Image > Apply Image. From the Source box select the texture image (it won’t appear in the list if it isn’t the right size), and then set the other options to suit so you get a distressed look to your copyright symbol. Click Ok.
Add a new layer and press Control + Alt + Shift + E to create a flattened version of the image on this layer but maintaining its transparency. Make all other layers invisible and crop the image close around your shape.
Then choose File > Save As and save it as a .PNG image to use in Photoshop or Lightroom as a copyright overlay.
If you select the top layer and press Control + I you’ll invert it to make a white version of the copyright image that you can then save as a second .png file.
Make sure to also save your file as a .psd file if you think you might need to make changes to it – for example, to change the date – a .png file is flattened so it won’t be easy to edit – a .psd file will be much easier to update.
How to use the Targeted Adjustment Tool to get a better Black and White Image
In the Black & White mix dialog is a Targeted Adjustment Tool (TAT).
You can use this TAT to craft your own black and white image.
To do this, select the TAT and drag up or down on an area of the image to lighten or darken the color under the TAT. This is often easier than dragging on the color sliders to adjust your black and white image.
The TAT is handy for crafting a black and white image to look the way you want it to look.
Learn how to create an oval frame effect in Photoshop. This video includes how to use a clipping mask, sample a color from an image, make a leaf brush, paint multi-color leaves on an image, add a stroke border to the oval frame and even change its color. This is a jam packed tutorial suitable for a competent beginner or intermediate level Photoshop user.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can make an oval framed photo effect in Photoshop. Before we get started doing this effect let’s have a look and see what it is that we’re aiming for.
What I’m going to do is take this image here and frame it inside an oval frame. And we’re going to add a little border stroke around the frame and then add these decorative elements. The colors for each of these elements is going to be sampled from the image and this is just a single brush that paints in different colors. So if you’re ready let’s get started with this tutorial. So if you’re ready let’s get started with this tutorial.
I’m going to begin here with a new image so I’ll click File, New and I’m just going to do an 11 by 8-1/2 letter size image. But you can make yours whatever size that you like. And here’s my image.
I’m going to center the oval so I’m going to start with a couple of guides. I want a 50 percent guide horizontal and a 50 percent vertical. It’s just a little bit easier to do this with guides. Then I’m going to target my marquee tool. I want the elliptical marquee tool. It shares a toolbar position with the rectangular marquee. But it’s the elliptical marquee that you want. I’m going to hold my mouse pointer over the intersection of these two gridlines and then hold Alt down as I drag out to create my oval. This creates an oval that’s centered over those lines. Of course if I add a Shift key at this point I’ll have everything constrained to a perfect circle centered on this document. But I want an oval so I’m going to let go of the Shift key but make sure that I keep the Alt key held down until I’ve finish drawing my shape. I’ll let go the left mouse button and then let go of the Alt key. This is my shape.
I’ll need a new layer so I’ll click the New Layer icon here and I’m going to fill this with black. So I’m just going to set black as my foreground color and Alt Backspace, Option Delete on the Mac. You can fill it with any color at all but I’m just using black. Now I can get rid of my guide so I’m going to click View and I’m going to clear my guides. I’m going to bring in my image here so I’m just going to drag on the background layer and just add it to this image. Now I want it centered so I’m going to press the Shift key as I center it over this image. I can now close this because I don’t need it any longer. I have my oval still selected. You can probably just see the marching ants there. Now that’s going to get in the way when I start to resize and move this image so I’m going to press Ctrl or Command D to deselect the marching ants. Now I’m going to target my move tool, Ctrl T, Ctrl 0 so I can see my handles. I’m just going to drag everything into position. I’m going to use the Shift key with that corner handle because that will drag everything in proportion. I’m now going to create a clipping mask.
So with this layer selected, Layer, Create Clipping Mask. Now I need to select that checkmark before I can do that so let’s create the clipping mask. And now let’s just fine- tune this image. And I think that’s a pretty good position for it. Now I want to focus on the background layer because I want to sample one of the colors from this image for the background layer. Now the image that we saw had a background which was sampled from the image. So I’m going to target the eyedropper tool here and I’m just going to target this little girl’s dress to get a color from her dress. And when I do you can see that the color is in the top of the ring here. That’s the one I’m going to select. And I have a 3 by 3 average so I’m averaging out the colors under the cursor. So I could go for a slightly lighter blue if I wanted. Let’s select that. And now with the background layer selected I’m going to Alt Backspace, Option Delete to add that color. Now let’s go and add a border around this oval. And to do that I’m going to need to reselect the oval. So I’m going to target the oval shape here, click on the magic wand tool here, it shares a toolbar position with the quick selection tool, but we want the magic wand. We want to make sure that Contiguous is selected. And now I’m just going to click here on this underlying shape which is this black shape here and that gives me this selection.
I’m going to add a new layer so I’m just going to make sure that my new layer goes in at the top and it’s not part of this clipping group. If it were I would have to right click it and choose Release Clipping Mask but it’s now not part of that group. You could see that the marching ants are in position so what we need to do now is to select the color to use. So again I’m going to use the eyedropper and I’m going to select a greeny color from the grass in the background here. So we’ll select that, Edit, Stroke. And you’ll need to experiment a bit with the stroke to see what works best with your image. But I found that a 20 pixel stroke on this particular image is pretty good so I’m just going to settle for a 20 pixel stroke. And I’m doing it over the center and I’ll click Ok. And there’s my stroke. To deselect the marching ants Ctrl or Command D. Now we’re in a position to brush on some leaves around the edge of this image. But to do so we’re going to need to create a brush first up. So let’s go and create a brush. If you’ve already created a brush or you have a brush that you want to use you can skip this step but I’m just going to show you quickly how I created my brush.
I’ll choose File, New and just click Ok. I just need any old document here. I’m going to select the custom shape tool here. It shares a toolbar position with the rectangle tool and these other tools. But it’s custom shape that I want. From the options here on the toolbar I want to select Pixels and I’m going to select black and white as my colors. In earlier versions of Photoshop you’ll still have these three options but they’re going to be side by side here. You just want to make sure that you select the fill pixels or the pixels option. Here I’m going to select a shape which is a leaf shape.
Now last time I selected this shape so let’s make a different shape this time. I’m going to select this one here and then I’m going to drag to draw it on the image. And I’m going to hold the Shift key down as I did so it’s constrained to a nice proportion. Now all I need do is to select Edit and then Define Brush Preset. And I’m going to call this leaf and click Ok. And that is now that shape is now saved as a brush so I can just discard this image. I don’t need it any longer. Now I can go and select my brush. So I’m going to target the brush tool and from the brush dropdown list here I’m going to select my brush. And my brush is always going to be the very, very last one in this brushes palette if I’ve just created it. So this is my brush.
I’m just going to click to select it and then just click outside here to hide that window. Now you can see that the brush is huge and way, way too big right now. So I’m just going to press the square bracket key, the opening square bracket key, to just size it down to size. Now if I start painting I’m first of all going to add a new layer and I’m going to just sample a color from this image. So let’s sample this orange color and let’s just see what happens if I start to paint. Well it’s not looking anything like what it is that we want it to look like. So I’m just going to Ctrl Z to get out of there and let’s go and set up our brush so it paints a little bit more intelligently. I’m going to click here to open the brush panel.
Now in the brush panel here the first thing I want to do is go to brush tip shape, tap on it and I’m going to increase the spacing because I want this brush to be spaced out quite a bit. I could change the size at this point if I wanted to but I’ve already measured this and it’s a pretty good size so I’m going to leave that. I’m going to enable Shape Dynamics and click on Shape Dynamics. Now I want the size to vary a little bit so I’m going to adjust the size jitter. That will make it size in different size brushes as I paint. And I’m also going to adjust the angle jitter. Now I can adjust it to quite a high value here because I don’t mind if these leaves point in completely the opposite direction. In fact that’s going to look pretty good for my leaves. And then I’m going to tap Scattering to enable that and to go to get the Scattering controls. I’ve got Scattering enabled here on both axes and I can just pull it out or push it in to see what I’ve got. I think I want a little bit better control than adjusting count because this is going to give me way too many leaves so I think I’d rather paint more and have less of a count. So I think that’s going to be pretty good.
The last thing I need to do is to enable Color Dynamics. What I want with Color Dynamics is I’d really like this brush to do all the work for me and I want it to paint in color. So I’ve got orange as my background color. Now I’m going to tap here and I’m going to select a color from the image to be the foreground color. So I’m thinking sort of a lighter yellow, maybe I’ll just pick it up from the palette here. So this is my foreground color. This is my background color and I have Apply per Tip enabled and foreground, background jitter at 100 percent. I’ve got hue jitter, saturation jitter and brightness jitter all at zero percent and purity at zero percent as well. What this brush is going to do is it’s going to toggle its colors between these two and so I won’t have to do any of the work myself. I’m going to close this dialog, make sure that I’m painting on a brand new layer, and I’m just going to start to paint. And you can see that the colors are toggling between the foreground and background color. And that just lets me paint my autumn leaves without having to do really much work at all.
Now I can paint as much or as little of these leaves as I want. I’m painting over the edge a little bit here because I’d like some leaves to be eventually underneath this stroke border so I’m just going to add plenty of leaves in there. And I’ll add a couple of stray leaves in the bottom here as well. I can add them by just single tapping or I can paint. When I’m happy with that the last thing I need to do is to get rid of the leaves that are actually over the image here. So I’m going back to my magic wand tool and I’m going back to my stroke layer here and with Contiguous enabled I’m just going to click inside this stroke layer. And what that does is it selects everything inside that layer. And now I can come onto my paint layer and I could do one of two things. I could just press Delete to delete the leaves that are inside this shape but perhaps if I wanted to add some more leaves later on it would be a better idea if I actually added a mask. And that’s very easy to do.
I’m just going to click here the Add Layer Mask icon. Now when I add my layer mask it’s working the wrong way around. You can see what it’s done is it’s clipped and hidden all the leaves around the outside and just left the ones in the middle. We want the exact opposite to be the case so I’ll click on my mask and press Ctrl and I and that just inverts the mask. So you can see now we’ve got the leaves on our image and they’re all around the edge of the image. It’s just that the stroke is underneath the leaves. There’s a very, very easy solution to that. I’m going to select the layer that contains the stroke and just move it up above the leaves and now the stroke is over the leaves. Before we leave this tutorial let’s have a look and see what would happen if we decided that instead of this green edge we would like a pink edge perhaps sampling the pink from this little girl’s headband. Well let’s go first of all and sample the pink. And this is the pink that I’m going to use so I have it selected as the foreground color. I want to make this stroke which is now green into pink.
Now if I press Alt Backspace I’m just going to make the whole layer pink and that’s not what I want to do. I just want to fill the pixels that are already filled on that layer. So I can click here to lock the transparent pixels on this layer, looking for this lock icon to appear. Now if I press Alt Backspace I’m just going to change the color of that stroke. And it’s picked up the foreground color in the image. And now I would just either drag this lock icon into the trash can here or I can just click this icon again. That would unlock it. So there you have an oval framed effect with some autumn leaves that you’ve created using a brush of your own in Photoshop.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my video tutorials on this YouTube channel and visit projectwoman.com for more tips, tricks and tutorials on Illustrator, Photoshop, Photoshop Elements, Lightroom and a whole lot more.
Learn how to use the color sliders to get a great Black and White image
You can convert any image into black and white by pressing the letter V or select B&W. However, you can also craft your own black and white image to get a better result than you get with the default settings if you drag on the color sliders in the Black & White Mix panel.
Each slider controls one of the underlying colors in the image. Drag to the right to lighten a color in the black and white or to the left to darken it.
Using the sliders, you can get a crafted black and white image that looks the way you want it to look.
Sliders for which there is not corresponding color in the underlying image will have no effect or little effect when you drag on them.
Lightroom has two types of collections: regular Collections and Smart Collections. Smart Collections are live and they are created as a result of filtering your photos according to rules that you write. You cannot add an image to a Smart Collection by dragging and dropping it into the collection. You can’t remove an image from a Smart Collection just because you don’t want it in there – it can only be removed if it fails to meet the criteria you set up for the collection.
Smart collections are a handy way to create collections and to manage your photos and here I’ll show you how to make use of them.
Shipped Smart Collections
There are a few Smart Collections which ship with Lightroom. To find these, click the Collections panel in Lightroom and click on the Smart Collection Set. Click the Smart collection called Without Keywords. As its name suggests, this collection shows you all the images in your Lightroom catalog that do not have keywords associated with them.
If you’re like me you’ll want to close this one pretty quickly – it can be scary to see just how many images aren’t keyworded!
You can learn more about this collection by right clicking its name and choose Edit Smart Collection. You’ll see that the Smart Collection is configured to contain all those images for which the Keywords property is empty.
There are other collections which are shipped with Lightroom including Recently Modified which is a collection of images that have been edited recently.
You can, if desired, change the Recently Modified Smart Collection to span a different number of days. Click this collection , right click and choose Edit Smart Collection. You can see that the collection criteria is set to be Edit Date > Is in the last
When you do so, Lightroom checks the images in your catalog to determine which images meet this criteria and it displays these in this Smart Collection.
Make your own Smart Collections
In addition to those shipped with Lightroom you can create your own Smart Collections. For example, if you color your images red meaning a certain thing you can create a Smart Collection that contains all the images which are colored red.
To do this, click to open the Collections panel, click the plus symbol and choose Create Smart Collection. Type a name for it such as Red Images, click Inside a Collection Set and choose to add it to the Smart Collections set. From the options below select Label color is red.
Click Create to create the collection – it will contain all images in your collection which have the red label color associated with them.
Remove an Image from a Smart Collection
The only way you can remove an image from a Smart Collection is to configure it so it no longer meets the criteria for the Smart Collection. For example an image will no longer appear in the Without Keywords collection if you add a keyword to it.
You can remove an image from the Red Images collection if you remove or change its color label. When it no longer has the red color label associated with it, it will no longer appear in the collection.
Similarly, if you apply the red color label to an image in Lightroom it will be automatically added to the Red Images Smart Collection.
One of the benefits of Smart Collections is that they’re continually updated by Lightroom. So Lightroom ensures that all the images which match the criteria you use to define the Smart Collection are in that collection.
How Smart Collections differ from Regular Collections
Smart Collections behave differently to Regular Collections in a few key ways. One difference is that you cannot arrange images in a Smart Collection into your own custom order.
The collection order can only be set to one of the Lightroom default Sort Order options; Capture Time, Edit Order, Edit Time, Edit Count, Rating, Pick, Label Text, Label Color, File Name, File Extension, File Type and Aspect Ratio. Regular collections, on the other hand, can be sorted into User Order which is useful for slideshows and web pages for example.
You also cannot set a Smart Collection as the Target Collection because you cannot add images to a Smart Collection manually. It can only be added if it matches the criteria which describes that collection.
Over to you .. Do you use Smart Collections in Lightroom and, if so, how do you use them? Do you use the shipped collections or make your own?
Quickly Converting your Image to Black and White with this shortcut key
The simplest way to convert an image to black and white is to press the letter V. This is a toggle so press it once to turn the image into black and white and again to make it a color image.
You can also convert an image to black and white by clicking the B&W option in the HSL/Color/B&W panel.
If Auto is enable click it to get a black and white conversion tailored to the needs of the image.
And, if the sliders are already all at different values you can reset them all to zero by holding Alt (Option on the Mac) and then click the ‘Reset black and white mix” option. Choose which is the best starting point for your conversion and progress from there.
If Auto is enabled, click it to get a black and white mix appropriate to the image.
Here I show you how to create works of art using your images in Photoshop. Included is how to find and select texture images to use, how to blend these into the image and, how to add a lightening effect to highlight areas of the image to draw attention. Also, included is one method of adding a vignette to an image.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can make art from your photos using textures in Photoshop. Before we get started with this video tutorial let’s have a look and see what we’re aiming for. This is the image that we’re aiming for. And quite often when I’m doing these tutorials I’ll play around with a few images before I come up with something that I really want to share. But today it was just this one image, this one texture and the whole thing just blew my mind. So here it is in video form.
To start off with I’m going to show you where I got my textures because these textures are totally awesome and I love this guy’s work and I want to introduce it to you. So this is a Flickr photo stream and the guy is called Skeletal Mess. And he has a whole lot of textures that you can download. Now I downloaded this one. It’s very big but I just want to show you his set that he has on Flickr so you can see the sort of potential for what there is available. Now with this particular image I was having a look through his sets and just having a look to see what I might use. And this one really spoke to me and I’m going to show you why because we’ll go back to the image that I have and we’ll see why blue worked particularly well for this image. So let’s just wind back what I’ve done.
So I’m just going to the layers palette for this image and let’s go and create a brand new image. Okay, so here’s our duplicate image that we’re going to work with. That was what we were aiming for so now I’m going to take away the pieces that went to make up this image. Now you’ll see why I thought that that blue texture would work particularly well here because this image has no sky and if we can borrow the blue from this texture then that would give us an awesome result. We could have used this one too or this one and perhaps just rotated them. But this one really spoke to me so I downloaded that. So I’m just going to grab it now because whenever I download an image even though I can just drag and drop it into Photoshop I’ll also save it just in case I want to use it again later on.
So I’m just going to bring it in here. It’s a whole lot smaller than my image but because it’s a texture that doesn’t really matter. So now I’m going to grab the move tool and just size it to fit all the way across my image. And again because it’s a texture it doesn’t matter that it’s pulled a little bit out of square. So it’s been pulled a little bit wider than it was tall. The next thing I’ll do is just run down these blend modes and just see what it gives me because this is like totally the most exciting thing that you get to do. So I’ll just select Dissolve and then we’ll just run down these blend modes until we get what we’re looking at. And Multiply I think is probably the one I’m going to come back and use but let’s just see what there is in this list. And it was at the point at which I got to that Multiply blend mode that I thought I actually had something I really wanted to work with but you might find other things here that are speaking to you. There’s a whole lot of potential. I usually run down the list and then come back up and by then I’ve pretty much made my choice as to what is working for me. This one possibly but it’s not nearly as good as the Multiply one. So here’s the Multiply blend mode applied to this image.
Now having achieved that I thought in actual fact the middle of the image could be a bit lighter. So what I did was I added a brand new layer and from my tools palette which has gone walkabout here I just grabbed the elliptical marquee tool and just dragged out an oval on that image. I switched so that white and black would be my colors and I also added a feather to this. So I’ll choose Select and then Modify Feather. This is not a very sophisticated feather option but I’ll just add a 100 pixel feather radius to it. That just really softens this edge so now when I fill it by pressing Ctrl Backspace, Command Backspace on the Mac, it’s going to have this feathered soft edge. So now Command or Ctrl D to deselect the selection.
Now I have a big white splat right in the middle of image. That’s obviously not going to work but what I’d want to do then is to blend it in so again I’ll just select the first blend mode in the list and then just run down until I find something that works for me. And here’s Overlay blend mode. That’s lightening that image really well in the area where the lightening effect was. I’m thinking that’s probably the blend mode of choice. But let’s just go and check these others particularly in this lighter area with soft light, hard light, vivid light and pin light. You’re never really sure that they’re not going to give you something so I always run through those just in case one is better than the other. So we’re pretty much to the end and Overlay is going to be our choice. So I’m going back up to pick up Overlay. Now this is too white for me so I’m just going to drag down on the opacity of that layer just to make it a little less opaque. I’m also going to test around this area. I’m thinking that some of this lightness is coming through from this layer and it’s probably a bit more than I want.
So again I’m going to add a layer mask to this layer, go and grab a paintbrush and just paint with black with a very small opacity brush, you can see it’s only 26 percent opacity, just to knock out the bits where I think the lightening effect is too much. I really just want it on the front part of this boat. So once I’ve neatened that effect up now I’m thinking a vignette around the edge. Now there’s umpteen ways of adding vignettes. I’m just going to show you one of them. So a brand new layer, I’m going to go back to my marquee tool, this time the rectangular marquee, I’m just going to drag in around about probably an inch into the image and then I’m going to invert the selection, select Inverse so everything that was selected is now not selected.
So I’ve got this outside edge selected. Now I’m going to sample a color from the image by clicking the eyedropper. I’m thinking one of the colors around here is kind of pretty good. It’s sort of dark but not really, really dark. I’m thinking that color was pretty good. And now I’ll Alt Backspace, Option Delete on the Mac, to create that as my fill color. Now I can deselect my selection with Ctrl or Command D. Now this is not looking like a vignette but that’s fine because we’re going to again run down our blend modes and look for something that is going to give us a darkening effect at the edge. Things you would look for are going to be in this light field. Obviously Overlay is going to do it. Multiply will do it as wells. That will always darken everything up a little bit.
So they’re the ones to look out for but also look out for any surprises as you run down. You might see something that gives you an effect that makes you go oh, wow, that is just too amazing. So I’m headed towards probably Overlay. So now it’s still not the vignette effect that I want but I’m going to blur this. So with that layer selected I’m going to go Filter > Blur > Gaussian Blur. Gaussian Blur is an awesome blur for just blurring things to almost oblivion. So here it is at zero radius effectively and now we’re just going to wind it up to soften this edge and pretty much just blend it into the image. And at some point it just becomes a really, really nice soft vignette effect for our image. So I’m just going to click Ok.
So there we have the effect. It’s very, very simple. This is a throwaway image. It’s just the sky is gone. It’s Hong Kong. It’s smoggy. It’s an overcast day. The sky is just nonexistent and I really wouldn’t have given this image a second look except that I was looking for a challenge. Add a really nice texture from Skeleton Mess free online textures from Flickr, add a bit of a highlight in the middle and then add this vignette effect and we’ve got an image that is now a keeper.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel. Please subscribe and also visit my website at projectwoman.com for more tips, tricks and tutorials on Illustrator, Photoshop, Lightroom, iPad and a whole lot more.
