Learn how to fine tune sharpening with the Amount and Radius Sliders
The Detail panel in Lightroom controls sharpening on the image. Use the Amount slider to manage the intensity of the sharpening – set this to a high value to begin.
The Radius slider adds halos around the edges in the image which is what gives the sharpening effect.
For an image with lots of fine lines and detail such as a building select a low radius. For a portrait or an image with softer detail, use a high radius value.
Hold the Alt key (Option on the Mac) as you drag on the Radius slider to see the halos.
How to prepare your image for sharpening so you can make a good adjustment
To sharpen an image, first make sure that the main image is visible at a 1:1 ratio in size so you can see the resulting sharpening effect more clearly.
To control what appears in the Preview window, click the indicator in the top left of the Detail panel and click an area of the image to preview. Choose a good position on the image as a preview – something that needs to be good and sharp.
You can also click on the image in the Preview – click once to see the preview filled with the image and again to zoom into the image.
Drag the image in the Preview window to see different parts of it.
Learn how to create an oval frame effect in Photoshop. This video includes how to use a clipping mask, sample a color from an image, make a leaf brush, paint multi-color leaves on an image, add a stroke border to the oval frame and even change its color. This is a jam packed tutorial suitable for a competent beginner or intermediate level Photoshop user.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can make an oval framed photo effect in Photoshop. Before we get started doing this effect let’s have a look and see what it is that we’re aiming for.
What I’m going to do is take this image here and frame it inside an oval frame. And we’re going to add a little border stroke around the frame and then add these decorative elements. The colors for each of these elements is going to be sampled from the image and this is just a single brush that paints in different colors. So if you’re ready let’s get started with this tutorial. So if you’re ready let’s get started with this tutorial.
I’m going to begin here with a new image so I’ll click File, New and I’m just going to do an 11 by 8-1/2 letter size image. But you can make yours whatever size that you like. And here’s my image.
I’m going to center the oval so I’m going to start with a couple of guides. I want a 50 percent guide horizontal and a 50 percent vertical. It’s just a little bit easier to do this with guides. Then I’m going to target my marquee tool. I want the elliptical marquee tool. It shares a toolbar position with the rectangular marquee. But it’s the elliptical marquee that you want. I’m going to hold my mouse pointer over the intersection of these two gridlines and then hold Alt down as I drag out to create my oval. This creates an oval that’s centered over those lines. Of course if I add a Shift key at this point I’ll have everything constrained to a perfect circle centered on this document. But I want an oval so I’m going to let go of the Shift key but make sure that I keep the Alt key held down until I’ve finish drawing my shape. I’ll let go the left mouse button and then let go of the Alt key. This is my shape.
I’ll need a new layer so I’ll click the New Layer icon here and I’m going to fill this with black. So I’m just going to set black as my foreground color and Alt Backspace, Option Delete on the Mac. You can fill it with any color at all but I’m just using black. Now I can get rid of my guide so I’m going to click View and I’m going to clear my guides. I’m going to bring in my image here so I’m just going to drag on the background layer and just add it to this image. Now I want it centered so I’m going to press the Shift key as I center it over this image. I can now close this because I don’t need it any longer. I have my oval still selected. You can probably just see the marching ants there. Now that’s going to get in the way when I start to resize and move this image so I’m going to press Ctrl or Command D to deselect the marching ants. Now I’m going to target my move tool, Ctrl T, Ctrl 0 so I can see my handles. I’m just going to drag everything into position. I’m going to use the Shift key with that corner handle because that will drag everything in proportion. I’m now going to create a clipping mask.
So with this layer selected, Layer, Create Clipping Mask. Now I need to select that checkmark before I can do that so let’s create the clipping mask. And now let’s just fine- tune this image. And I think that’s a pretty good position for it. Now I want to focus on the background layer because I want to sample one of the colors from this image for the background layer. Now the image that we saw had a background which was sampled from the image. So I’m going to target the eyedropper tool here and I’m just going to target this little girl’s dress to get a color from her dress. And when I do you can see that the color is in the top of the ring here. That’s the one I’m going to select. And I have a 3 by 3 average so I’m averaging out the colors under the cursor. So I could go for a slightly lighter blue if I wanted. Let’s select that. And now with the background layer selected I’m going to Alt Backspace, Option Delete to add that color. Now let’s go and add a border around this oval. And to do that I’m going to need to reselect the oval. So I’m going to target the oval shape here, click on the magic wand tool here, it shares a toolbar position with the quick selection tool, but we want the magic wand. We want to make sure that Contiguous is selected. And now I’m just going to click here on this underlying shape which is this black shape here and that gives me this selection.
I’m going to add a new layer so I’m just going to make sure that my new layer goes in at the top and it’s not part of this clipping group. If it were I would have to right click it and choose Release Clipping Mask but it’s now not part of that group. You could see that the marching ants are in position so what we need to do now is to select the color to use. So again I’m going to use the eyedropper and I’m going to select a greeny color from the grass in the background here. So we’ll select that, Edit, Stroke. And you’ll need to experiment a bit with the stroke to see what works best with your image. But I found that a 20 pixel stroke on this particular image is pretty good so I’m just going to settle for a 20 pixel stroke. And I’m doing it over the center and I’ll click Ok. And there’s my stroke. To deselect the marching ants Ctrl or Command D. Now we’re in a position to brush on some leaves around the edge of this image. But to do so we’re going to need to create a brush first up. So let’s go and create a brush. If you’ve already created a brush or you have a brush that you want to use you can skip this step but I’m just going to show you quickly how I created my brush.
I’ll choose File, New and just click Ok. I just need any old document here. I’m going to select the custom shape tool here. It shares a toolbar position with the rectangle tool and these other tools. But it’s custom shape that I want. From the options here on the toolbar I want to select Pixels and I’m going to select black and white as my colors. In earlier versions of Photoshop you’ll still have these three options but they’re going to be side by side here. You just want to make sure that you select the fill pixels or the pixels option. Here I’m going to select a shape which is a leaf shape.
Now last time I selected this shape so let’s make a different shape this time. I’m going to select this one here and then I’m going to drag to draw it on the image. And I’m going to hold the Shift key down as I did so it’s constrained to a nice proportion. Now all I need do is to select Edit and then Define Brush Preset. And I’m going to call this leaf and click Ok. And that is now that shape is now saved as a brush so I can just discard this image. I don’t need it any longer. Now I can go and select my brush. So I’m going to target the brush tool and from the brush dropdown list here I’m going to select my brush. And my brush is always going to be the very, very last one in this brushes palette if I’ve just created it. So this is my brush.
I’m just going to click to select it and then just click outside here to hide that window. Now you can see that the brush is huge and way, way too big right now. So I’m just going to press the square bracket key, the opening square bracket key, to just size it down to size. Now if I start painting I’m first of all going to add a new layer and I’m going to just sample a color from this image. So let’s sample this orange color and let’s just see what happens if I start to paint. Well it’s not looking anything like what it is that we want it to look like. So I’m just going to Ctrl Z to get out of there and let’s go and set up our brush so it paints a little bit more intelligently. I’m going to click here to open the brush panel.
Now in the brush panel here the first thing I want to do is go to brush tip shape, tap on it and I’m going to increase the spacing because I want this brush to be spaced out quite a bit. I could change the size at this point if I wanted to but I’ve already measured this and it’s a pretty good size so I’m going to leave that. I’m going to enable Shape Dynamics and click on Shape Dynamics. Now I want the size to vary a little bit so I’m going to adjust the size jitter. That will make it size in different size brushes as I paint. And I’m also going to adjust the angle jitter. Now I can adjust it to quite a high value here because I don’t mind if these leaves point in completely the opposite direction. In fact that’s going to look pretty good for my leaves. And then I’m going to tap Scattering to enable that and to go to get the Scattering controls. I’ve got Scattering enabled here on both axes and I can just pull it out or push it in to see what I’ve got. I think I want a little bit better control than adjusting count because this is going to give me way too many leaves so I think I’d rather paint more and have less of a count. So I think that’s going to be pretty good.
The last thing I need to do is to enable Color Dynamics. What I want with Color Dynamics is I’d really like this brush to do all the work for me and I want it to paint in color. So I’ve got orange as my background color. Now I’m going to tap here and I’m going to select a color from the image to be the foreground color. So I’m thinking sort of a lighter yellow, maybe I’ll just pick it up from the palette here. So this is my foreground color. This is my background color and I have Apply per Tip enabled and foreground, background jitter at 100 percent. I’ve got hue jitter, saturation jitter and brightness jitter all at zero percent and purity at zero percent as well. What this brush is going to do is it’s going to toggle its colors between these two and so I won’t have to do any of the work myself. I’m going to close this dialog, make sure that I’m painting on a brand new layer, and I’m just going to start to paint. And you can see that the colors are toggling between the foreground and background color. And that just lets me paint my autumn leaves without having to do really much work at all.
Now I can paint as much or as little of these leaves as I want. I’m painting over the edge a little bit here because I’d like some leaves to be eventually underneath this stroke border so I’m just going to add plenty of leaves in there. And I’ll add a couple of stray leaves in the bottom here as well. I can add them by just single tapping or I can paint. When I’m happy with that the last thing I need to do is to get rid of the leaves that are actually over the image here. So I’m going back to my magic wand tool and I’m going back to my stroke layer here and with Contiguous enabled I’m just going to click inside this stroke layer. And what that does is it selects everything inside that layer. And now I can come onto my paint layer and I could do one of two things. I could just press Delete to delete the leaves that are inside this shape but perhaps if I wanted to add some more leaves later on it would be a better idea if I actually added a mask. And that’s very easy to do.
I’m just going to click here the Add Layer Mask icon. Now when I add my layer mask it’s working the wrong way around. You can see what it’s done is it’s clipped and hidden all the leaves around the outside and just left the ones in the middle. We want the exact opposite to be the case so I’ll click on my mask and press Ctrl and I and that just inverts the mask. So you can see now we’ve got the leaves on our image and they’re all around the edge of the image. It’s just that the stroke is underneath the leaves. There’s a very, very easy solution to that. I’m going to select the layer that contains the stroke and just move it up above the leaves and now the stroke is over the leaves. Before we leave this tutorial let’s have a look and see what would happen if we decided that instead of this green edge we would like a pink edge perhaps sampling the pink from this little girl’s headband. Well let’s go first of all and sample the pink. And this is the pink that I’m going to use so I have it selected as the foreground color. I want to make this stroke which is now green into pink.
Now if I press Alt Backspace I’m just going to make the whole layer pink and that’s not what I want to do. I just want to fill the pixels that are already filled on that layer. So I can click here to lock the transparent pixels on this layer, looking for this lock icon to appear. Now if I press Alt Backspace I’m just going to change the color of that stroke. And it’s picked up the foreground color in the image. And now I would just either drag this lock icon into the trash can here or I can just click this icon again. That would unlock it. So there you have an oval framed effect with some autumn leaves that you’ve created using a brush of your own in Photoshop.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my video tutorials on this YouTube channel and visit projectwoman.com for more tips, tricks and tutorials on Illustrator, Photoshop, Photoshop Elements, Lightroom and a whole lot more.
Learn how to use the color sliders to get a great Black and White image
You can convert any image into black and white by pressing the letter V or select B&W. However, you can also craft your own black and white image to get a better result than you get with the default settings if you drag on the color sliders in the Black & White Mix panel.
Each slider controls one of the underlying colors in the image. Drag to the right to lighten a color in the black and white or to the left to darken it.
Using the sliders, you can get a crafted black and white image that looks the way you want it to look.
Sliders for which there is not corresponding color in the underlying image will have no effect or little effect when you drag on them.
Here I show you how to create works of art using your images in Photoshop. Included is how to find and select texture images to use, how to blend these into the image and, how to add a lightening effect to highlight areas of the image to draw attention. Also, included is one method of adding a vignette to an image.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can make art from your photos using textures in Photoshop. Before we get started with this video tutorial let’s have a look and see what we’re aiming for. This is the image that we’re aiming for. And quite often when I’m doing these tutorials I’ll play around with a few images before I come up with something that I really want to share. But today it was just this one image, this one texture and the whole thing just blew my mind. So here it is in video form.
To start off with I’m going to show you where I got my textures because these textures are totally awesome and I love this guy’s work and I want to introduce it to you. So this is a Flickr photo stream and the guy is called Skeletal Mess. And he has a whole lot of textures that you can download. Now I downloaded this one. It’s very big but I just want to show you his set that he has on Flickr so you can see the sort of potential for what there is available. Now with this particular image I was having a look through his sets and just having a look to see what I might use. And this one really spoke to me and I’m going to show you why because we’ll go back to the image that I have and we’ll see why blue worked particularly well for this image. So let’s just wind back what I’ve done.
So I’m just going to the layers palette for this image and let’s go and create a brand new image. Okay, so here’s our duplicate image that we’re going to work with. That was what we were aiming for so now I’m going to take away the pieces that went to make up this image. Now you’ll see why I thought that that blue texture would work particularly well here because this image has no sky and if we can borrow the blue from this texture then that would give us an awesome result. We could have used this one too or this one and perhaps just rotated them. But this one really spoke to me so I downloaded that. So I’m just going to grab it now because whenever I download an image even though I can just drag and drop it into Photoshop I’ll also save it just in case I want to use it again later on.
So I’m just going to bring it in here. It’s a whole lot smaller than my image but because it’s a texture that doesn’t really matter. So now I’m going to grab the move tool and just size it to fit all the way across my image. And again because it’s a texture it doesn’t matter that it’s pulled a little bit out of square. So it’s been pulled a little bit wider than it was tall. The next thing I’ll do is just run down these blend modes and just see what it gives me because this is like totally the most exciting thing that you get to do. So I’ll just select Dissolve and then we’ll just run down these blend modes until we get what we’re looking at. And Multiply I think is probably the one I’m going to come back and use but let’s just see what there is in this list. And it was at the point at which I got to that Multiply blend mode that I thought I actually had something I really wanted to work with but you might find other things here that are speaking to you. There’s a whole lot of potential. I usually run down the list and then come back up and by then I’ve pretty much made my choice as to what is working for me. This one possibly but it’s not nearly as good as the Multiply one. So here’s the Multiply blend mode applied to this image.
Now having achieved that I thought in actual fact the middle of the image could be a bit lighter. So what I did was I added a brand new layer and from my tools palette which has gone walkabout here I just grabbed the elliptical marquee tool and just dragged out an oval on that image. I switched so that white and black would be my colors and I also added a feather to this. So I’ll choose Select and then Modify Feather. This is not a very sophisticated feather option but I’ll just add a 100 pixel feather radius to it. That just really softens this edge so now when I fill it by pressing Ctrl Backspace, Command Backspace on the Mac, it’s going to have this feathered soft edge. So now Command or Ctrl D to deselect the selection.
Now I have a big white splat right in the middle of image. That’s obviously not going to work but what I’d want to do then is to blend it in so again I’ll just select the first blend mode in the list and then just run down until I find something that works for me. And here’s Overlay blend mode. That’s lightening that image really well in the area where the lightening effect was. I’m thinking that’s probably the blend mode of choice. But let’s just go and check these others particularly in this lighter area with soft light, hard light, vivid light and pin light. You’re never really sure that they’re not going to give you something so I always run through those just in case one is better than the other. So we’re pretty much to the end and Overlay is going to be our choice. So I’m going back up to pick up Overlay. Now this is too white for me so I’m just going to drag down on the opacity of that layer just to make it a little less opaque. I’m also going to test around this area. I’m thinking that some of this lightness is coming through from this layer and it’s probably a bit more than I want.
So again I’m going to add a layer mask to this layer, go and grab a paintbrush and just paint with black with a very small opacity brush, you can see it’s only 26 percent opacity, just to knock out the bits where I think the lightening effect is too much. I really just want it on the front part of this boat. So once I’ve neatened that effect up now I’m thinking a vignette around the edge. Now there’s umpteen ways of adding vignettes. I’m just going to show you one of them. So a brand new layer, I’m going to go back to my marquee tool, this time the rectangular marquee, I’m just going to drag in around about probably an inch into the image and then I’m going to invert the selection, select Inverse so everything that was selected is now not selected.
So I’ve got this outside edge selected. Now I’m going to sample a color from the image by clicking the eyedropper. I’m thinking one of the colors around here is kind of pretty good. It’s sort of dark but not really, really dark. I’m thinking that color was pretty good. And now I’ll Alt Backspace, Option Delete on the Mac, to create that as my fill color. Now I can deselect my selection with Ctrl or Command D. Now this is not looking like a vignette but that’s fine because we’re going to again run down our blend modes and look for something that is going to give us a darkening effect at the edge. Things you would look for are going to be in this light field. Obviously Overlay is going to do it. Multiply will do it as wells. That will always darken everything up a little bit.
So they’re the ones to look out for but also look out for any surprises as you run down. You might see something that gives you an effect that makes you go oh, wow, that is just too amazing. So I’m headed towards probably Overlay. So now it’s still not the vignette effect that I want but I’m going to blur this. So with that layer selected I’m going to go Filter > Blur > Gaussian Blur. Gaussian Blur is an awesome blur for just blurring things to almost oblivion. So here it is at zero radius effectively and now we’re just going to wind it up to soften this edge and pretty much just blend it into the image. And at some point it just becomes a really, really nice soft vignette effect for our image. So I’m just going to click Ok.
So there we have the effect. It’s very, very simple. This is a throwaway image. It’s just the sky is gone. It’s Hong Kong. It’s smoggy. It’s an overcast day. The sky is just nonexistent and I really wouldn’t have given this image a second look except that I was looking for a challenge. Add a really nice texture from Skeleton Mess free online textures from Flickr, add a bit of a highlight in the middle and then add this vignette effect and we’ve got an image that is now a keeper.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel. Please subscribe and also visit my website at projectwoman.com for more tips, tricks and tutorials on Illustrator, Photoshop, Lightroom, iPad and a whole lot more.
Create the Orton Effect in Lightroom with the Clarity Slider
The Orton Effect is named after photographer Michael Orton. This process results in a somewhat surreal image which has a slightly out-of-focus look while retaining lots of edge detail.
You can quickly give an image a faux Orton look using the Clarity slider in Lightroom. All you need to do is drag the Clarity slider to the left close to -100 and then, increase the Blacks in the image to an higher than usual value.
Of course there is a lot more to the Orton effect than this but this gives you a good start and, for many images, may be all you really need.
Learn how to combine two images to make a collage. Includes use of Blend modes in Photoshop, color range color selection, clipping mask, layer mask, hue saturation adjustment layer, drop shadow layer style.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can create some simple collage effects using blend modes in Photoshop. This is the effect that we’re going to create in this video tutorial. I’m going to show you how you can put the pieces of this together in just a few minutes using a couple of images and some blend modes.
We’re going to start off with this image and another one that I shot at the neon boneyard in Las Vegas, and that’s giving us the texture. And we’re going to combine these two images with a blend mode. And then we’re going to extract the color from this original image, this sort of orange color. And we’re going to recolor it using a Hue/Saturation adjustment layer. But if we wanted to leave it at this point we could leave it just with that additional color. And we’ll also going to add a drop shadow with a different color behind it.
So let’s see how we would create this effect. And I’m going to start with my two images, and I’m going to put one image into the other. So I’m going to grab this neon boneyard image and I’m just going to drag and drop its background layer in on top of this original image. I’m just going to size it so that it’s right over the top. And the first thing I would do with a collage like this is look and see what sort of opportunities I had with blend modes.
So I’ll generally select the first blend mode in the list, Dissolve, which generally gives me nothing at all. And now I can just arrow down and see what happens when I click on each of these blend modes. And all I’m looking for is something interesting. And you’ll generally get a better effect with this if you use images that are a little bit more textural and a little less like something where you don’t really particularly want to bring out of the image exactly what was in it. But you want to discover how these two images can interact with each other and what you can do with them as they interact. So that’s all the way down through the blend modes. And so I’m going to go back up and I’m going to settle on something that I want to use. And generally the most interesting bits are going to be in the overlay or the contrasty area. So in this area and sometimes even with lighten and darken.
So let’s just go up through these and find something that we like. And I’m thinking actually I might like something like this perhaps with the Opacity dragged down a little bit. Now what I want to do is to bring out the orange color in the original flower so that I can lighten them a little bit in this layer here. And what I’m going to do is create a duplicate of the background layer. And I’m going to drag it above the image. So right now all we’re seeing is this original background. And what I want to is to select the leaves in it.
Now the leaves are really bright colored here. So I’m going to choose Select. And in this case I’m going to use Color Range because it’s going to be the easiest way to select these leaves. Now either I can select on the sampled color and add to it this way by just clicking on these leaves or I could use just the reds and just grab the reds. But I think Sampled Colors is actually going to give me a slightly better effect here.
So let’s just go back to this and let’s choose Sampled Colors here and just click Ok. Now that has isolated the leaves here and what I want to do is to keep these leaves but drop the rest of the image out. And I’ll do that with a mask. And because my leaves are selected, all I need to do is to click on the Add Layer Mask icon. And what happens is that the leaves are then masked and left behind and the rest of the image is just dropped away. So this is the before and this is the after. And you can see we have brought in the color from these leaves.
Now if we wanted to we could even lighten this color. We’ve got some of the orange color in. But we may want to brighten it up even more. So I’ll make sure that my image layer is selected and choose Image, Adjustments. And then I could use levels or curves. I’m going to use levels, and I’ll just lighten this is a little bit and click Ok. Now in the earlier image that you saw we had actually colored these blue and it’s very easy to color them blue.
To do that we’ll choose Layer, New Adjustment Layer and we’ll choose a hue/saturation adjustment layer and just click Ok. Now I want this adjustment layer to only affect the red leaves so I’m going to clip this. So with this adjustment layer selected I’m going to choose Layer, Create Clipping Mask. And so anything that I do to this adjustment layer here is only going to affect the layer below, just these red flowers. So now let’s double click on the Hue/Saturation adjustment layer and now we can go and make some changes to it. And I’m looking for a blue color which will either be at this end or this end of the hue slider. So I can get to either this sort of greeny blue if I wanted or I can get to a sort of purplely blue. I’m thinking the greeny blue will be pretty good here. And now I can adjust its saturation and its lightness from here. So when I have what I like I’m just going to close that dialogue. So that has recolored those leaves to a bluey color.
And finally let’s add a drop shadow behind the leaves. So I’m going to select the leaf layer, and I’m going to choose a drop shadow effect. Now drop shadows might start out being dark but they don’t have to end up being dark. So what I’m going to do is go and find a really cool color for this drop shadow. And I’m thinking a really, really bright pink will do me. So let’s choose that. And I want to up the opacity of this. I could set it to normal so it’s going to be a very, very pink shadow. And then I’m going to adjust the settings for this. Spread is going to be the size of the shadow and softness or size is going to give me some softness. But there’s a very small sweet spot here on this that I can very, very easily exceed. So I’m just going to add my shadow in. And I think I’m going to multiply blend mode my shadow, not apply it with the normal blend mode. Although I could use normal for example with a much lower opacity if I wanted to give it this sort of pinky color. I might leave it at that.
So there’s a way of creating some interesting collage effects. And all we’ve done is grabbed a couple of images and put them on top of each other and blended them with something that counts as being an interesting blend mode. And then I isolated the orange flowers in the image and brightened them up. I also added a drop shadow in a very contrasty color. And I added to a hue/saturation adjustment layer that only effects these orange flowers to use the brightness of them but to color them a different color. And you can do all sorts of things by just combining images. And that gives you lots of practice at making color selections, using clipping masks, using masks, using blend modes and just having a little bit of playtime and a little bit of fun creating interesting effects in Photoshop.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my tutorials on this YouTube channel and please like and comment on the tutorials if you would. Also visit my website at projectwoman.com where you’ll find more tips, tricks and tutorials on Illustrator, Lightroom, Photoshop and a whole lot more.
Learn to create a monochrome stamp effect from a photo in Photoshop. Includes using filters such as Posterize, black and white, threshold and the Photocopy and Stamp filter to adjust the image to get the effect. Also see how Dodge and Burn can help you fine tune the effect.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can convert an image so that it looks like a stamped monochromatic image.
Before we get started on this tutorial this is the effect that we’re looking for. I have an original bird image here and what we’re going to do is to firstly get rid of the background around the bird. And then we’re going to convert it to black and white. We’ll posterize it and then we’ll apply a filter to it. And finally we’re going to apply the Threshold Adjustment. And we’re going to end up with this sort of stamped monochromatic effect from an original photograph. So let’s just hide that and let’s get started on the image that we’re working with. And I have a duplicate image sitting here.
Now I’ve already gone ahead and made the mask for this image so that we’re not wasting a lot of time cutting out the bird. But essentially what I would use is the Quick Select tool to just select over the bird. And then I made a duplicate of the background layer by just dragging it onto the New Layer icon and then just clicked this Layer Mask icon and that adds a layer mask to the image. So there’s the bit that we had selected. Then obviously I would make a much better selection and this would give me my isolated bird here.
So the next thing that we’re going to do is to convert this to black and white. So I’m going to click on the topmost layer and we’re going to do this using an adjustment layer. The reason for this is that it can then be redone later on if we don’t like the effect. So I’m going Layer, New Adjustment Layer, Black and White and click Ok, and here is the black and white adjustment.
Now what I’m looking for here is that we’re going to make this into a pure black and white only image later on so I want plenty of detail here. So I’m just going to walk these sliders in either direction to see where they go. And I want some edge detail because that’s going to define the birds so I probably want to bring the blue channels and the purple channels over towards the black. And let’s just see where the red gets us. I want to definitely see the bird’s eye so I want that to be different to the colors surrounding the bird. So I’m just looking for a reasonably good black and white conversion at this point, and I’ll just close that down.
Next we’re going to use Layer, New Adjustment Layer, Posterize. And what the posterize adjustment does is it flattens the image to a certain number of colors. They’re called levels but here we’ve got four levels of lightness and darkness. So if we had a color image we’d have four colors. And we can wind this up to a sort of surrealistic amount or we can take it back to a less realistic, more stylized amount. And that’s exactly what we want here.
But you’ll see that every time you change this it has different affects around the edge. So the difference between 5 and 7 and perhaps 6 and 5 is really quite significant. So I’m looking for a number of levels that gives me a good result. I’m worried about the eye disappearing here. Three is not enough. Four is a whole lot better. I really quite like that four so I’m just going to let that be what we’re using here. At this point if we were not getting the exact result that we like we could go back and dodge and burn on this layer. So we could grab the Dodge or Burn tools here to darken and lighten the image by clicking on these, taking the highlights, just make the brush a little bit smaller and perhaps brush around the edges here to darken it up which will ensure that later on we’re going to get some dark edges around the edge of our bird. So if that’s of concern to you selecting a tool such as Dodge or Burn will allow you to lighten and darken the areas around this bird that you want to have lighter or darker.
So for example if we really wanted to see this eye we could lighten the areas around the eye. So you can craft that to an extent using the Dodge and Burn tools here. So I’m just going to burn in a little bit around the top of the leg and the sides of the leg here, and perhaps just under the belly. So once we’ve done that I’m going to come up to the topmost layer and I’m going to make a flattened version of the image so far. And I do that by holding Ctrl and Alt and Shift and E, that’s Command, Option, Shift E on the Mac. And this gives us a flattened version of this that we can now apply a filter to.
I could use smart filters but the filter is just going to be fine for this. So I’m going to choose Filter and then Filter Gallery but before I do this I’m making sure I’ve got black and white as my foreground and background colors because the filter set that we’re using relies on black and white for the color. So if you don’t have black and white selected as the color it’s not going to be a black and white effect that you’re going to end up with. So I’m just going to drag this back in. And I used the Photocopy earlier, and I found that that was a really good result for me.
But you could also try the Stamp and see if in the light and dark balance you can get what you want with the Stamp. We’re going to get pretty much the Stamp effect by just using the Photocopy. But I’ve got a way of getting rid of these sort of almost blurry sort of gradient detail in the bird’s back. So I’m going to ignore that for now and just go for a good sort of stamped effect. I’m looking at the blacks and the whites in this image because that’s essentially what I’m going to get at the end of this. So I’m going to say that that’s good and click Ok.
And the final tool that we need to make these areas disappear is a Threshold Adjustment. And again, I’ll do this using an adjustment layer with Layer, New Adjustment layer and then Threshold. Now Threshold is an unusual sort of filter. What it does is it turns everything either pure black or pure white. There is no in between. And this selector here tells Photoshop at which point we want the colors to go to white or to black. So if we wind this back down a little bit we’re going to get rid of some of these areas in here and they’re become darker or lighter according to how we have this selected.
So I’m just going to go around about that midpoint because we do have this as an adjustment layer which means that if we make changes to this layer they will affect the adjustment layer. So I’m just going back to the Dodge tool here and just see if I can get rid of the very obvious sort of circling effect here, so I’ll just make that a little less obvious that that was something that got left behind with the Photocopy filter. Let’s just bring the exposure right up. And there’s our finished bird there. And we can do whatever we like with it.
You may want to save it out so that you could use it perhaps with a background color or something like that. But there’s this sort of stamped monochromatic effect created in Photoshop. And it’s done very easily by first just isolating the object and then converting it to black and white in a way that gives you the contrast that you want, posterize it to flatten it to some levels of color or levels of tonal range, create a brand new layer from that and apply a Photocopy or Stamp filter to it and then finally finish off with the Threshold Adjustment.
I’m Helen Bradley. Thank you for joining me for this video tutorial. If you liked the tutorial please Like it and comment on it and share it with your friends. Look out for more videos on my YouTube channel and visit projectwoman.com for more tutorials on Photoshop, Photoshop Elements, GIMP, Lightroom, Illustrator and a whole lot more.
Learn to create a vector sunburst in Illustrator – This works with all versions of Illustrator including the new CS6. The process is simple and uses a stroke to make the sunburst – it is quick and doesn’t require a lot of fiddling to create.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial I’m going to show you how you can create a sunburst vector shape in Illustrator.
Before we get started creating our sunburst effect let’s have a look and see what it is that we’re aiming for. Here I have a sunburst and it’s just offset in this rectangle, but you could have a circular one if you like.
We’re going to start with circular and then we’re going to crop it to a rectangle. So if you’re ready let’s have a look and see how we create this effect in Illustrator. And we’re going to start by creating a brand new document so I’ll just choose File, New. It doesn’t matter too much what my document looks like.
I’m going to start with the Ellipse tool. So, I’m going to select the Ellipse tool and drag a shape on my image. And I need this to be a perfect circle so I’m going to hold the Shift key as I draw it and then just let go. I want this to be black stroke and no fill so I’m just going to click on the fill here and turn the fill off.
Now let’s go to the Appearance panel for this selected path and I’m going to click the Stroke option. And I’m going to set the stroke to about 200 points. And when I do you’ll see that we get this sort of circle all the way around our shape which is pretty near exactly what we want when we click the Dash Line option. Now with the Dash Line option I can set the dashes to whatever I want and this is going to affect how many of these sunbeam things there are around the shape.
So let’s just go to 20 and try that. This is what I’m a little concerned about. You can see that there’s an uneven spacing here, but you’ll see that you can adjust that by clicking this option here. So just work out how many points you need to get the number of sunrays that you want for your particular shape. I’m going to do a few more in this one rather than less so I’m going to 10 points. And when I’ve got what I want I’m just going to click away from this. And this is the basic shape. Now before we can do anything with this shape we’re going to first have to expand its appearance.
So with the shape selected I’m going to choose Object and then Expand Appearance and then Object, Expand because I want this dialogue here. And I’m going to expand both fill and stroke So I’ll select both of those and click Ok. And now each of these sunbursts is a separate shape and I need now to close up the middle. And I can do that by grabbing the Lasso tool. It’s the easiest tool to use. And all I’m going to do is just drag around because I want to select all the nodes and pointers’ handles in the middle.
Now I’m going to choose Object and then Path, and I’m going to choose Average. And with Average I’m going to select both Horizontal and Vertical and click Ok. And what that does is it just closes up the middle nicely for me. So I’m going to click outside my shape and here is my sunburst shape. So with it selected I can then go to what is now my fill color and I can choose a different fill color for it. And we could fill it with a gradient.
We could do anything we liked at this point. So let’s see now how we’re going to crop it. So I’m going to select the Rectangle tool. I’m going to start by drawing a rectangle and I’m just going to hold the spacebar as I bring it in position over the top of my sunburst because I want to work out exactly where the sunburst is going and where the rectangle is going relative to it. So I think that’s a pretty good position for me. So I’m going to let go of the spacebar and let go of the left mouse button and now select all my objects. I’m selecting other everything, and in the Pathfinder I’m going to select Crop. And that crops the shape to the size of that rectangle. And we lost our fill here so let’s just click on the fill and put the fill back on.
So here is a shape that we could save to our Symbol library. And those sunbursts are very, very easy to create in Illustrator as vector shapes. And of course if you add it to your Symbol library then you’ll have it available anytime you want to use it. And it’s very easy to create ones with different numbers of rays in them.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out for more of my videos on this YouTube channel and please like and comment on the videos. Look out too for my website at projectwoman.com. There you’ll find more tutorials and tips and tricks for Illustrator, Photoshop, Photoshop Elements, Lightroom, GIMP and a whole lot more.
See how to create some effects such as rotations and a transparency heart effect in Illustrator. This is Part 2 of the videos on halftone hearts.
Transcript:
Hello, I’m Helen Bradley. Welcome to this video tutorial. In this tutorial we’re going to take a step further from our halftone hearts tutorial and have a look and see what we can do with the halftones that we create. In this video we’re going to go one step further than the last video.
In this video we’re going to create this sort of circular effect from the string of hearts that we created using the Blend tool in Illustrator. And then I’m going to show you how you can use a transparency mask to create this sort of effect in Illustrator as well.
We’re going to start with a brand new file. And I have some of the elements left over from the first video here that we’re going to use. And we’re going to bring in this heart shape. And I also have a spare set of this string of hearts that we created so I’m going to bring that in. That just saves us having to recreate those. Now I want two sets of this so I’m just going to drag a second set away from the first.
Let’s have a look first at how we would create that sort of spiral. I’m going to size the hearts down in proportion so I have a small set because I’m going to rotate these around to create the full rotation. To do that I’m going to choose Effect and then Distort and Transform and I’ll select Transform. I’m going to click Preview so I can see what’s happening, and I’m going to rotate these around at this bottom point. So this is the very bottom point of this chain of hearts and I’m going to rotate them 10 degrees. Now I haven’t got Copy set so this individual string is going to be rotated 10 degrees but I want enough rotations that I can go all the way around a circle. And if I rotate something 10 degrees in 10 degree increments I need 36 of those to go around the circle because a circle has 360 degrees. And that’s all I need to go to create this shape so I’ll click Ok.
And now that shape is created but of course it is still really just a string of heart. And to make it into the individual shapes we’ll choose Object and then Expand Appearance. And now it is those little heart shapes individually. The other thing I want to do is to create a set of halftone hearts that we can use as a transparency mask for this particular heart.
First of all I’m going to switch the foreground and background colors here so that we have a pink heart. And I need to create a box, a sort of rectangle of these hearts. So again I’m going to shrink these down so they’re about the same size or height as this heart is because they’re going to be used for a transparency mask for that. I’m going to select these and again I’m going to do is the transform so I’m going to choose Effect, Distort and Transform and then Transform. This time I’m going to create about 20 copies. And I want to move these so I’m going move these in a horizontal direction about 7 or 8 pixels, let’s say 8 pixels here, and just click Ok.
I just want a block of hearts big enough for me to put my heart on top of that. So they just need to be that size. I’m going to expand the appearance of this halftone effect so I’ll choose Object and then Expand Appearance. And then I want to copy it to the Windows clipboard so I’ll select it all and choose Edit and then Copy. So it’s now in the Windows clipboard and I can just tuck it outside out of the way because we don’t need it anymore.
With the heart shape selected I’m going to use the Transparency palette which we can get to by choosing Window and then Transparency. And I’m going to click to make a mask. And because I want this mask to be clipped to the heart shape I’ll click Clip. I’m going to select on the mask here and I’ll just choose Edit and then Paste. And here is the halftone heart shape. And I’m just going to position it into position here. And I want the little hearts to be pretty much up around the top curve of the heart so it’s really quite well defined. So I’m thinking that’s probably going to be about the right position. And then to go back to working with my heart I’ll click on the heart in the Transparency palette. And that’s how the final effect looks.
What I did when I showed it to you earlier was I created a filled, a red filled square that was over the top of the heart. I’m just going to create my square. And this needs to be sent behind so I’m going to send it to the back. And the heart itself instead of being filled with pink was filled with black so I’ll just click the fill color and we’ll fill it with black. Now if the mask is not in exactly the right place we can also just select back on the heart, reselect the mask and perhaps adjust the positioning of the mask by a pixel or two, reselect the heart and we’re back working with the heart itself.
So there are some effects that you can create using this sort of halftone effect which we created this time using halftone hearts rather than halftone dots in Adobe Illustrator.
I’m Helen Bradley. Thank you for joining me for this video tutorial. Look out on this YouTube channel for more of my video tutorials and go to my website at projectwoman.com for more tutorials, tips and tricks on Illustrator, Photoshop, Photoshop Elements, Lightroom and more.
